Brands
Models & trailers
1:14 THW Forklift 2.4G 100% RTR
500907175€220.00
Article number: 500907175 Product: 1:14 THW Gabelstapler 2.4 GHz RTR Awarded with the spiel gut® certification for particularly good and durable toys* The CARSON MODEL SPORT Linde H 40 D - THW forklift truck is a completely functional RC model that can lift loads of up to 200 g. The forklift truck and its numerous functions are remote-controlled by a 2.4 GHz 6-channel desk transmitter. Besides the driving functions, the truck has a fully functional forklift as well as a light and sound module. Driver figure, a pallet with load, and driving/transmitter batteries are included. 9 x AA mignon cells (included) supply the power, 5 in the truck and 4 in the remote control. OPTIONAL ACCESSORIES 500609042 AA-batteries 1.2 V/2100mAh Included: Pre-assembled ready-to-run forklift truck, 6-channel 2.4 GHz remote control system with carrying strap, driver figure, pallet with load, transmitter batteries
Models & trailers
1:14 Tipper Trailer Fliegl Stone Master
500907216€750.00
Article number: 500907216 Product: 1/14 Tipper Trailer Fliegl Stone Master The 3-axle Fliegl Stone Master dump truck is an accurate, licensed replica of a current half pipe tipper for building site use. The truck can be tipped and unloaded by means of the tipper mechanism which is available separately. When the tipper is lowered, the rear wall is automatically secured by means of a 2-hook locking mechanism. The kit comes equipped as standard with a steel frame and steel tipper body with rear wall, ABS work platform, semi-circular mud flaps, king pins, height-adjustable trailer supports, dummy air springs modelled faithfully on the original and a ball bearing kit. The 7-chamber rear light cluster of the CARSON 3-axle Fliegl Stone Master dump truck can be electrically retrofitted. The following components are additional needed for 500907216: Tipping-Function: 1 pcs. 500907217 Spindle drive 1 pcs. 500907166 Motor for Spindle drive 1 pcs. 500608107 Battery Li-PO 7,4V/1300mAh 1 pcs. 500907070 Switch for Spindle drive Optional E-Support Legs: 1 pcs. 500907218 Trailer E-Sup.Legs w/o Motor (2) 1 pcs. 500907199 Motor for E-Sup.Legs 1 pcs. 500608107 Battery Li-PO 7,4V/1300mAh 1 pcs. 500907070 Switch for Spindle drive Optionally, this can be controlled by radio, you need another receiver (for channel 5 or 6), zwo Speedcontroller 500906137 Micro and zwo T-Plug Adapter 500906099. You can't use/controll this with MFC-01/03! Included: Kit with detailed instructions Safety note: Not for children under 14 years. The packaging has to be kept since it contains important informations. Illustration may vary from actual product in the box. CARSON reserves the rights to change, update or replace any component at any time. Warning! Not suitable for children under 14 years.
Models & trailers
1:14 Trailer Chassis 20/40ft.Cont.
500907348€410.00
Article number: 500907348 Product: 1:14 Trailer Chassis 20/40ft.Cont. Prepared for everything! With the 1:14 scale trailer chassis, container transport becomes a breeze. The detailed model with CNC-milled aluminium frame is the perfect complement for your Tamiya tractor. Other features of the trailer chassis include mechanical seat posts, a pendulum axle suspension with leaf springs, wide tyres with foam inserts and chrome-plated rims. The container attachment is variable. The new Carson liquid container (article number: 500907349) is suitable as cargo. WARNING! Not for children under 14 years. The packaging has to be kept since it contains important informations. Illustration may vary from actual product in the box. TAMIYA-CARSON reserves the rights to change, update or replace any component at any time.
Basic accessories
1:14 Trailer palette case w. Paletts (6)
500907651€140.00
Article number: 500907651 Product: 1:14 Trailer palette case w. pallets (6) Even more realism! The CARSON pallet box is the optical supplement or useful extension for the CARSON 3-Axle Stanchion Trailer (N° 500907629) and the 3-Axle Flatbed Trailer III (N° 500907650). The pallet case is made of laser-cut and CNC-bent sheet steel and offers space for a maximum of 24 pallets. The flap is locked by neodymium magnets. Of course, electronic components can also be accommodated in the pallet box. The scope of delivery includes detailed assembly instructions and 6 Euro pallets. - Steel laser-cut and CNC-bend - authentic opening mechanism - Space for 24 pallets - 6 Euro pallets made of plastic - The flap is locked by neodymium magnets - detailed manual - Compatible with 500907629 1:14 3-Axle Stanchion Trailer III (new susp.) and 500907650 1:14 3-axle flatbed trailer III Steel Optional Accessories: 500907049 1:14 Euro-Pallet-Set (5) Plastic/Beige 500907608 1:14 Wooden EPAL Euro-Pallet
Basic accessories
1:14 Trailer Splash guard 907235/907629
500907646€31.99
Article number: 500907646 Product: Trailer Splash guard 907235/907629 The splash guard can easily be retrofitted to the CARSON trailers Fliegl Megarunner (500907235) and the 3-axle stanchion trailer (500907629). The required boreholes are already existent in the rear bumper. Of course, this set can also be used for self-construction. The components required to assemble the rear splash guard are included in the set and are simply screwed to the trailer bumper / rear underrun protection. Included: 1 large splash guard, assembly material.
Basic accessories
1:14 Trailersuspension-Set w/ 8mm lift
500907643€82.99
Article number: 500907643 Product: 1:14 Trailersuspension-Set w/ 8mm lift The new generation of CARSON trailer axles with dummy air springs and lift kit. Bumps are cushioned even better by the new, softer rubber bellows and offer a driving experience that is absolutely true to the original. The two suspensions included (standard & with raised height + 8 mm) offer you the option of adapting your trailer to your higher (+ 8 mm) tractor from the saddle level. Included: kit and instructions.
RC construction vehicles & utility vehicles
1:16 Excavator Volvo 2,4 GHz 100% RTR
500907339€99.99
Article number: 500907339 Product: 1:16 Excavator Volvo 2.4 GHz 100% RTR King of the Building Yard! The 1:16 scale remote-controlled Volvo crawler excavator is a versatile RC work vehicle with numerous functions such as 360-degree assembly rotation. A powerful chain drive brings the crawler excavator on its way, the grappler and the excavator shovel can be operated via the 2.4 GHz multi-channel remote control. The excavator shovel can be used to lift up to 200 g of weight. A real construction site feeling is ensured by the engine sound as well as the horn and the LED light unit. The powerful nickel-metal hydride battery provides 40 minutes of driving fun with a charging time of 3 hours. Equipped with a trouble-free 2.4 GHz remote control system, transmitter batteries, driving battery and USB charger the RC crawler excavator with Volvo branding is ready for use immediately after charging. Buy – Charge – Action! Included: Fully assembled model, 2.4GHz remote control unit, NiMH drive battery 4.8V / 400 mAh, USB charger, instruction manual. WARNING! Not for children under 3 years. The packaging has to be kept since it contains important informations. Illustration may vary from actual product in the box. TAMIYA-CARSON reserves the rights to change, update or replace any component at any time.
RC construction vehicles & utility vehicles
1:16 RC Tractor w. front loader 2.4G 100%
500907347€89.99
Article number: 500907347 Product: 1:16 RC Tractor w. front loader 2.4G 100% Tractor with the function of a wheeled loader! The front loader drives in rough terrain and is equipped with grip rubber tires in the true-to-original profile. The agricultural vehicle in a scale of 1:16 includes many details with the latest technology such as the interference-free 2.4 GHz multi-channel remote control, sound, light and engine sound. The remote control system controls functions such as light, horn and engine sound. The front loader can lift and lower loads up to 200g. The transmitter can also be used to raise and lower the bucket. The built-in Li-Ion driving battery allows a driving time of up to 50 minutes. The tractor is fully equipped with transmitter, transmitter batteries, battery pack, charger and instructions and ready to start immediately after charging. Buy – Charge – Drive! Included: Fully assembled model, 2.4GHz remote control unit, Li-Ion drive battery 3.7V / 600 mAh, USB charger, 2 x AA transmitter batteries, instruction manual. WARNING! Not for children under 3 years. The packaging has to be kept since it contains important informations. Illustration may vary from actual product in the box. TAMIYA-CARSON reserves the rights to change, update or replace any component at any time.
RC construction vehicles & utility vehicles
1:16 Road Tank for RC Tractor green
500907663€44.99
Article number: 500907663 Product: 1:16 Tanker for RC Tractor green Water coming up! The tanker is the perfect addition for the CARSON RC Tractor JCB (Art. No.: 500907653) tuned by CARSON. The fold-out spraying device can be controlled via the tractor's transmitter. The capacity of the tank is 500ml. Attention! Only fill with water. Included: Functional trailer. WARNING! Please keep this information for any possible correspondence. Subject to technical change and change of color. Not suitable for children under three years. Choking hazard! Small parts may be swallowed! To be used under the direct supervision of an adult. Adult help is required to remove the securing devices.
RC construction vehicles & utility vehicles
1:16 Trailer for RC Tractor yellow
500907661€39.99
Article number: 500907661 Product: 1:16 Trailer for RC Tractor yellow Simply load it up! In conjunction with the CARSON JCB RC tractor (art. no.: 500907653), the skip can be steered up and down via a transmitter. The drop sides can be folded manually. This makes the trailer perfect for transporting "heavy loads". Included: Functional trailer. WARNING! Please keep this information for any possible correspondence. Subject to technical change and change of color. Not suitable for children under three years. Choking hazard! Small parts may be swallowed! To be used under the direct supervision of an adult. Adult help is required to remove the securing devices.
RC construction vehicles & utility vehicles
1:20 Excavator Loader JCB 2.4G 100% RTR
500907668€92.99
Article number: 500907668 Product: 1:20 Excavator Loader JCB 2.4G 100% RTR The CARSON 1:20 JCB Excavator loader is a precisely reproduced model of the British construction machinery manufacturer JCB. The remote-controlled construction vehicle is fully functional and has moving parts such as the shovel, which can be raised and lowered via the included transmitter. The additional light and sound functions, which can also be controlled via the transmitter, make the model appear even more realistic. The Excavator loader is made of high-quality materials and has a detailed body that make it a great accessory for any construction machinery enthusiast. Fully assembled model, 2.4GHz remote control unit, NiMH drive battery 4.8V / 400mAh, USB charger, 2 x AA transmitter batteries, instruction manual WARNING! Please keep this information for any possible correspondence. Subject to technical change and change of color. Not suitable for children under three years. Choking hazard! Small parts may be swallowed! To be used under the direct supervision of an adult. Adult help is required to remove the securing devices.
RC construction vehicles & utility vehicles
1:20 Fire Truck 2.4G 100% RTR
500907670€89.99
Article number: 500907670 Product: 1:20 Fire Truck 2.4G 100% RTR Have you ever dreamed of being a fireman or firewoman? Now you can make this dream come true - with the 1:20 MB Fire Brigade with Turntable Ladder, which is 100% Ready-to-Run and takes you straight into the RC world. Thanks to the modern 2.4GHz remote control, you can navigate this impressive fire truck through terrain with ease. The 360 degree rotation of the body, which you can control via the transmitter, makes it easy to manoeuvre through obstacles. And the water spray function is controllable via the transmitter, so you can put out any fire that comes your way. But that's not all - this fire truck has 4WD with powered rear axles, so it can easily drive on uneven terrain. The engine and driving sound as well as the LED lighting make the driving experience even more realistic. Now experience the excitement that only a fireman or firewoman can. Whether you buy it as a gift for an RC enthusiast or use it as a highlight for your own collection, this fire truck will not disappoint. With its realistic features and effortless operation, it's a must-have for anyone who loves firefighting or is passionate about model building. Included: Fully assembled model, 2.4 GHz RC system, NiMH powerpack 4,8V/400mAh, charger, Filling bottle, transmitter batteries and manual. WARNING! Please keep this information for any possible correspondence. Subject to technical change and change of color. Not suitable for children under three years. Choking hazard! Small parts may be swallowed! To be used under the direct supervision of an adult. Adult help is required to remove the securing devices.
RC construction vehicles & utility vehicles
1:20 MB Arocs Cement Mixer 100% RTR
500907667€79.99
Article number: 500907667 Product: 1:20 MB Arocs Cement Mixer 100% RTR Discover the 1:20 MB Arocs concrete mixer that is 100% ready-to-run and takes you straight into the RC world! With its state-of-the-art 2.4GHz remote control and powered rear axles, you can navigate the concrete mixer effortlessly through any terrain. But that's not all this fascinating miniature truck has to offer! Thanks to the integrated LED lighting and the realistic engine sound, you feel like a real driver while controlling your concrete mixer via the transmitter. With the controllable horn, you can also cause a stir as you drive through the streets. But the highlight of this model truck is definitely the demo function, here all the functions of the concrete mixer are played automatically so you know exactly what they are. Experience the 1:20 MB Arocs concrete mixer now and be amazed by its performance and functions. Whether as a gift for the RC enthusiast or as a highlight for your own collection - this concrete mixer will not disappoint you! Included: Fully assembled model: 2.4GHz remote control unit, NiMH drive battery 4.8V / 400 mAh, USB charger, 2 x AA transmitter batteries, instruction and manual WARNING! Please keep this information for any possible correspondence. Subject to technical change and change of color. Not suitable for children under three years. Choking hazard! Small parts may be swallowed! To be used under the direct supervision of an adult. Adult help is required to remove the securing devices.
RC construction vehicles & utility vehicles
1:20 MB Arocs Crane Truck 100% RTR
500907666€89.99
Article number: 500907666 Product: 1:20 MB Arocs Crane Truck 100% RTR Welcome to the 1:20 MB Arocs Crane Truck 100% RTR - the ultimate model for real crane enthusiasts! With 2.4GHz remote control and 360 degree rotation of the superstructure via the transmitter, this crane truck is a real highlight. The load hook and telescopic boom can be extended and retracted via the transmitter. With switchable LED lighting and engine sound, the crane truck is an impressive model. With 4WD and powered rear axles, the crane truck is powerful and versatile. In addition, the crane truck has a demo function that presents or demonstrates all functions in sequence. With a length of 400 mm, a width of 155 mm and a height of 215 mm as well as a weight of 1238 g, the crane truck is an impressive model. Experience the fun and enjoyment that this crane truck brings now! With a driving time of 30 minutes, you can have many hours of enjoyment. Included: Fully assembled model: 2.4GHz remote control unit, NiMH drive battery 4.8V / 400 mAh, USB charger, 2 x AA transmitter batteries, instruction and manual WARNING! Please keep this information for any possible correspondence. Subject to technical change and change of color. Not suitable for children under three years. Choking hazard! Small parts may be swallowed! To be used under the direct supervision of an adult. Adult help is required to remove the securing devices.
RC construction vehicles & utility vehicles
1:20 MB Arocs Garbage Truck 100% RTR
500907672€79.99
Article number: 500907672 Product: 1:20 MB Arocs Garbage Truck 100% RTR The 1:20 MB Arocs rubbish truck is the perfect vehicle for all those who are interested in the RC world and the work of rubbish disposal. The 2.4GHz remote control makes it easy to steer the rubbish truck and thanks to the 4WD system with powered rear axles, you can master any terrain with ease. The LED lighting and realistic engine sound can be conveniently controlled via the transmitter and the horn adds even more authenticity. You can easily transport the rubbish with the rubbish screw conveyor and the container can be emptied via the transmitter thanks to the lever function. This model offers a realistic driving experience and is 100% ready-to-run, so you can get started immediately after loading. Experience the fascination of model building now and let the 1:20 MB Arocs refuse truck convince you!
Trailer model kits & Accessories
1:24 20' Container Trailer
510003887€55.99
Article number: 510003887 Product: 1:24 20' Container Trailer Length of the model 300 mm 100% NEW TRAILER MOULDS Designed to optimize the logistics of road transport, our trailer for 20" containers or swap bodies is inspired by the FCT model (fixed container transportation) produced by Tecnokar, leader company in high-Quality semi-trailer production and distribution since 1986. With its carefully built structure which offers the right balance between stability, sturdiness and durability, the fixed container transportation chassis is a steel Hbeam chassis with a 2′ fifth wheel coupling kingpin, Jost double-speed retractile oscillating rails and Twist arms with zinc-coated twists. It is also provided with the basic ADR standard equipment. Detailed Plastic Kit of model 20' Container Trailer in scale 1:24
Model vehicles 1:24
1:24 Alfa Romeo Giulietta Spider 1300
510003653€37.99
Article number: 510003653 Product: 1:24 Alfa Romeo Giulietta Spider 1300 Model Dim.: 16,2 cm COLORS INSTRUCTIONS SHEET - DETAILED ENGINE - CHROME PARTS AND CAPOTE FOR CLOSED VERSION In 1962 the Alfa Romeo Giulietta Spider evolved with the adoption of some aesthetic improvements on the bodywork, some interior details and, the new 1.570 cm3 four cylinder engine able to release 92 Hp. Thanks to the new engine the Italian car was able to reach the max speed of 172 Km/h. The mechanical lay-out was based on the rear-wheel drive and four independent wheel suspension. The "Veloce" sport version was able to offer to the customers a powerful engine (112 Hp) with two carburetors and the adoption of the disk brakes on the frontal wheels. Detailed Plastic Kit of model
Model vehicles 1:24
1:24 Audi Quattro Rally
510003642€36.99
Article number: 510003642 Product: 1/24 Audi Quattro Rally SUPER DECALS SHEET In 1980, during the Geneva Motor Show, the German car manufacturer presented to the public its new twodoor coupé called Audi Quattro. Produced for all the '80s the Italian name choosed by Audi (Quattro is the Italian word for "four") ine was pointed out the main feature and the most important selling point : the fourwheel drive. It was the first time that the 4x4 solution was adopted on a coupé with the goal to achieve high numbers in terms of production and sales on the market. The Audi Quattro was able to release good driving performance, thanks to its frontal longitudinal engine, and very good reliability on all type of road conditions. From the mass production a dedicated car for competitions was developed on 1981 and it debuted in the World Rally Championship, achieving good results. The success of "Quattro" cars is still existing today in fact the name has become a real "brand" that identifies all the range of Audi’s four wheel drive production. Detailed Plastic Kit
Model trucks 1:24
1:24 Australian Truck
510000719€61.99
Article number: 510000719 Product: 1:24 Australian Truck Mod.Dim.: 33,2 cm Australian outback truckers covering enormous distances on rugged and unsealed roads needs to equip their rigs with special modifications. They include a huge bull-bar (roo-bar), a sheet of wire mesh for windscreen protection, special dust filters, additional long range fuel tanks, heavy duty wheels, airconditioning and an array of different driving lights. Bulk goods are normally transported in Road Trains, which can have up to 3 trailers with a total length of over 31 metres.
Model vehicles 1:24
1:24 B.M.W. 320 Gr. 5
510003626€36.99
Article number: 510003626 Product: 1:24 B.M.W. 320 Gr. 5 In 1976 the FIA, within the scope of motor racing competition, introduced a new Group 5 section reserved for "special" production cars. The new rules imposed a body width similar to that of normal series production, upon which however, it was possible to apply dimensionally larger mudguards in order to benefit from wider track widths and larger tires. BMW participated in Group 5 competitions with a dedicated version of its new flagship model, the E21 "320". A new aerodynamic profile was created that integrated the large fenders and it was also fitted with a powerful 300 hp engine. The car was successfully used by the official BMW team and also as a developmental platform for young, emerging drivers.
Trailer model kits & Accessories
1:24 Cargo Trailer
510003885€61.99
Article number: 510003885 Product: 1:24 Cargo Trailer Model Dim.: 58,0 cm SUPER DECALS SHEET FOR 2 VERSIONS This latest-generation semitrailer is representative of much of Europe’s on-road haulage vehicles. Featuring an efficient braking system, side impact protection, a considerable load capacity, these trailers are used extensively and are produced by at least ten or so specialised companies, which provide a comprehensive range of variants to meet the specific needs of individual customers.
Trailer model kits & Accessories
1:24 Curtainside Trailer
510003918€59.99
Article number: 510003918 Product: 1:24 Curtainside Trailer Model Dim.: 58,0 cm TRACTOR NOT INCLUDED IN THE BOX SUPER DELAS SHEET with tractor decals included NEW WHEELS During the last few years the Curtainside became more and more the standard trailer for various freight transport. Due Due to the possibility to slide the canvas sides, it is easy to load and unload merchandise. Our model represent a 3-axle trailer with frame protection and solid tail gates, as it is generally used all over Europe.
Model trucks 1:24
1:24 DAF 95 Master Truck Tractor Tr.
510000788€59.99
Article number: 510000788 Product: 1:24 DAF 95 Master Truck ZgM The 'Concept 95/380' has been, for some time, the flagship product in the renowned DAF manufacturer's lineup, representing a further development of the Space Cab series. It was recognized by the market as a significant evolution compared to its predecessors. Indeed, numerous technical and aesthetic improvements were developed and adopted, greatly appreciated by users of road industrial vehicles, especially for long-haul journeys. The soundproof cabin and advanced shock absorbers for the time provided top-of-the-market onboard comfort, and the powerful 6-cylinder ATI (Advanced Turbo Intercooling) engine ensured good performance with a particular focus on operating costs. Warning! Not suitable for children under 14 years.
Model trucks 1:24
1:24 DAF XF105
510003917€74.99
Article number: 510003917 Product: 1/24 DAF XF105 Model Dim.: 24,5 cm SUPER DECALS SHEET - ADHESIVE STENCIL - NEW CHROMED WHEELS - NEW TYRES This road haulage tractor by DAF is a restyled version of the successful previous series. Offering excellent reliability and a good standard of comfort on long-haul routes, the XF105 also features very good mechanical reliability and outstanding tengine performance under a wide range of conditions, in full compliance with the strictest environmental standards. Also, in the event of an accident, the cab provides the driver with an extremely high level of protection. The name "Smoky" comes from the race horse owned by the driver father (from here "Junior") which, used to winning, during the race was disappearing like a puff of smoke in front of his opponents. In a Wild West atmosphere, the horses are the protagonists in the airbrushed sides of his DAF XF 105 too.
Trailer model kits & Accessories
1:24 Dumper Trailer
510003845€57.99
Article number: 510003845 Product: 1:24 Dumper Trailer Mod.Dim.: 37,0 cm This great three axis trailer has been developed for earth and building debris transportation within construction sights. Equipped with high resistant steel chasse, it is capable to support stress on unpaved working areas. Characterized by a large tipping bucket capable of several tons payload. This trailer has installed with an efficient braking system enabling to guarantee maximum safety during transportation. It is further has a bucket covering system to eliminate loss of material risks while moving.
Trailer model kits & Accessories
1:24 European Tractors TYRES and RIMS
510003909€26.49
Article number: 510003909 Product: 1:24 European Tractors TYRES and RIMS 100% NEW MOULDS - DECALS SHEET INCLUDED Accessories suitable for European tractors only. THE BOX CONTAINS 7 TYRES + 7 RIMS : 2 front rims and tyres size 385/65 R22.5 - 5 rear rims and tyres size 315/80 R22.5 Deatailed plastic kit of European Tractors TYRES and RIMS in scale 1:24
Model vehicles 1:24
1:24 Fiat 131 Abarth Rally OLIO FIAT
510003667€39.99
Article number: 510003667 Product: 1:24 Fiat 131 Abarth Rally OLIO FIAT The Fiat 131 Abarth evolved from the initial two-door sedan model. The Abarth development involved many interventions such as the adoption of a lighter chassis, larger wheel mudguards, air intakes on the bonnet and on the sides to optimize the mechanical cooling system. The Fiat 131 Abarth used an in-line front longitudinal 4-cylinder engine with a light alloy head and 4 valves per cylinder. Initial manufacturing began in 1976 leading to participation in the World Rally Championship where it won three constructors' championships, a FIA Drivers' Cup and a drivers' championship. It took part in international competitions until 1982 when it was replaced by Lancia brand cars. Some of its body liveries, associated with the sponsors of the period, have become iconic in the history of "off road" motor racing competitions. Detailed plastic kit in scale 1:32
Model vehicles 1:24
1:24 Ford Escort RS 1800 MK.II Lombard
510003650€36.99
Article number: 510003650 Product: 1:24 Ford Escort RS 1800 MK.II Lombard Model Dim.: 16,7 cm EXTRA CATALOGUE SUPER DECALS SHEET The Ford Escort Mk 2 was launched in 1975. It was a significant evolution compared to the Escort Mk 1 that debuted at Brussels Motor Show in January 1968. It used the reliable mechanical components as the Mk 1 but adopted a new design based on a squared-style look able to be in line with the aesthetic and stylistic taste of the 70s. In addition to the more classic version, it was also released the Escort Sport version characterized by a more aggressive look and distinctive sport interiors. To compete, successfully, in World Rally Championship, a dedicated model, the RS 1800, was introduced to complete the line up. Successful results has been achieved. From 1975 to 1979 the Ford Escort RS 1800 won for five consecutive years the prestigious RAC (Royal Automobile Club) Rally, the most important rally event organized in the United Kingdom and an important milestone of the World Rally Championship. Among the others the team Mikkola Hannu - Hertz Arnee won the "Lombard" on 1978 and 1979 Detailed Plastic Kit of model Ford Escort RS 1800 MK.II Lombard RAC Rally in scale 1:24
Model vehicles 1:24
1:24 Ford Escort Zakspeed Gr.2 D&W
510003664€37.99
Article number: 510003664 Product: 1:24 Ford Escort Zakspeed Gr.2 D&W The Ford Escort Mk 2 was launched on the market in 1975. It was a decisive evolution compared to the Escort Mk 1 presented at the 1968 Brussels Motor Show. The previous version retained the high quality mechanics but was completely revised in the design that he interpreted the aesthetic and stylistic taste of the 70s. In addition to the more functional versions, there was also an Escort Sport version characterized by a more aggressive look and a markedly sporty interior. Finally, the RS 1800 version with 115 HP twin-shaft engine was also presented, which formed the basis for the special version used in the Rally world championship and which achieved significant results. The iconic Zakspeed Team built and used a dedicated version of the Escort Mk 2 between 1977 and 1978. Detailed plastic kit in scale 1:24
Model vehicles 1:24
1:24 Ford Transit Mk. II
510103687€38.99
Article number: 510103687 Product: 1/24 Ford Transit Mk. II Model Dim.: 18,5 cm THIS MODEL IS A RIGHT & LEFT-HAND DRIVE Transit is a light commercial vehicles series produced since 1953 by Ford Germany and Ford UK and conceived for European market. The front engine of these vehicles allows to have a lower loading bed, which eases the loading process. Anyway the very first Transit was produced in 1965 by the German and British Ford together, expressly wanted by Henry Ford; this cooperation gave life to what is Ford Europe today and to the well-known vehicle MK I. In 1978 it was further reshaped and the MK II was born. In 1984 an esthetic restyling was made on the front bumper and to the engine, which was a 68 horsepower Diesel York of 2498 cbm. These vehicles have been a commercial success not only in Europe, as still today they are in production also for extra European markets. Detailed Plastic Kit of model Ford Transit Mk. II in scale 1:24
Model trucks 1:24
1:24 Freightliner FLC
510003859€59.99
Article number: 510003859 Product: 1/24 Freightliner FLC Mod.Dim.: 32,5 cm This more than 50 year old US-truck manufacturing company has an excellent reputation for quality and beautiful design of their products. In 1981 Daimler-Benz AG, the parent company of Mercedes-Benz, one of the worlds biggest truck manufacturers, purchases the Freightliner Corporation. The company will continue all activities under the original Freightliner name. Daimler-Benz has also imported several models to Europe for demonstration purposes and truck shows. All Freightliner trucks have a common basic technical design, many are custom-built to the customers needs. The model is a Conventional FLC 12064T Tractor with a 475 HP Cummins-Diesel engine and a 13 speed Fuller-Roadranger Transmission.
Model trucks 1:24
1:24 Freightliner FLD 120 (Classic)
510003925€65.99
Article number: 510003925 Product: 1:24 Freightliner FLD 120 (Classic) Model Dim.: 32,5 cm CONTAINS 2 CHROMED SPRUE - SUPER DECALS SHEET FOR 2 VERSIONS - COLOR INSTRUCTIONS SHEET Founded in 1942, with more than 70 years of activity in the commercial and industrial vehicles industry, the Freightliner Trucks company, is a piece of the road transportation history in the United States. Since 1981 the owner is the multinational corporation Daimler AG that reinforced the role of Freightliner to be a reference point on the market. One of its icons is the Freightliner FLD that was introduced on the market in 1987. It is characterized by an aerodynamic design, applied to the "conventional tractor", that was very innovative for the time. The Freightliner FLD remained in production for many years until the beginning of the 2000. A lot of versions were produced with special configurations and outfittings able to satisfy every kind of transport need. The FLD was an excellent platform for the customization and for the creativity of the American "truck drivers". Detailed Plastic Kit of model Freightliner FLD 120 (Classic) in scale 1:24 Warning! Not suitable for children under 14 years.
Model trucks 1:24
1:24 Freightliner Heavy Dumper Truck
510003783€67.99
The renowned US Portland based company "Freightliner Trucks", which operates in the industrial vehicle sector and is owned by the automotive giant Daimler, is mainly known for being one of the key manufacturers of trucks used for "on road" transportation roles. However, it is also important to recognise the versatility and success over time, of those Freightliners that were dedicated to "heavy duties" jobs. In fact, market demand for "quarry and construction" vehicles saw strong growth in the late 1970s and early 1980s, subsequently impacting the production volumes of the main truck and heavy vehicle manufacturers. Freightliner designers have worked on the most suitable technical solutions to meet the needs of the construction market, namely, reinforced chassis and rear axles for greater payload, tough and sturdy tipping rear decks, optimized engines and transmissions for demanding loads and steep slopes.
Model trucks 1:24
1:24 Iveco HI-WY E5 "Abarth"
510003934€69.99
Article number: 510003934 Product: 1:24 Iveco HI-WY E5 "Abarth" Model Dim.: 25,4 cm SUPER DECALS SHEET FOR 2 VERSIONS - CHROMED ADHESIVE - CHROMED WHEEL RIMS - NEW TYRES - COLOR INSTRUCTION SHEET The Stralis Hi-Way is the latest evolution of the famous heavy duties truck produced by Iveco. The Stralis Hi-Way is characterized by several technological and aesthetic improvements compared to previous versions. The cabin offers a completely new design and is equipped with integrated electronic systems able to optimize the on-board comfort and to provide the highest safety standard. The evolution of the Stralis is also characterized by a completely new "powertrain" able to minimize the fuel consumption and the maintenance costs. The new engine strength is in fact to stay in line with the new Euro 5 anti-pollution regulation and to keep a very high operation effectiveness in terms of cost of ownership. In 2013 Iveco Stralis Hi-Way won the "International Truck of the Year" award assigned by a pool of journalists of the most important European trucks magazines. On 2017 Iveco announced that has supplied a Stralis Hi-Way, characterized by a dedicated livery, to Abarth Racing Team to support the logistic of the famous Italian sport brand. Detailed Plastic Kit of model Iveco HI-WY E5 "Abarth" in scale 1:24
Military model vehicles 1:24 1:48
1:24 Jeep Willys MB 80th Anniversary
510003635€37.99
Article number: 510003635 Product: 1:24 Willys Jeep MB "80th Anniversary" In 1940, after World War II had broken out, the US general staff ordered various factories to design a light multipurpose vehicle with all-wheel drive. The American Bantam Company, Willys Overland, and Ford Motor Co. competed with each other. Willys prototype was chosen, which, after an initial run of 1500 vehicles, went into mass production at the beginning of1941 and reached a total output of 640.000 units out of which 277.000 pieces were produced by Ford under a licensing agreement. This shows that the Jeep was the most widely produced light vehicle of the war industry during World War II. Even after 80 years, the "Willys" is still considered today, to be the four-wheeled vehicle which is most symbolic of the American army during the Second World War, and thanks to its enthusiasts and collectors, there are many examples of the jeep, still in perfect working order. Detailed plastic kit
Model vehicles 1:24
1:24 Lamborghini Countach 25th Anniv.
510103684€34.99
Article number: 510103684 Product: 1:24 Lamborghini Countach 25th Anniv. Model Dim.: 18,0 cm Final version of the glorious Countach, dedicated to the 25th anniversary of Lamborghini, boasts numerous improvements, were in fact changed about 3,000 of the 8,000 pieces that make up the car. Much of the aesthetic innovations derived from the prototype Countach Evoluzione in 1986, the first supercar in the world made of carbon fiber. The air box and the air intakes were redesigned and enlarged and were mounted of miniskirts , the geometry of the suspension was modified. The improved aerodynamics allowed a maximum speed of 300 km / h. This was the last version made the Countach, which remained in production until 1990 when it was replaced by the Diablo. Detailed plastic kit
Model vehicles 1:24
1:24 Lancia HF Integrale
510003658€36.99
Article number: 510003658 Product: 1:24 Lancia HF Integrale Model Dim.: 16,0 cm COLOR INSTRUCTION SHEET The Lancia Delta HF four wheels-drive is considered an Icon of the Rally Competitions History. The Delta HF was produced in the second half of the 80s and participated in the World Rally Championship from 1987 to 1988 winning two world titles and achieving important results in a lot of competition as the Rallye de Monte-Carlo and the Rallye San Remo. The Lancia Delta Integrale was the evolution of the Delta HF. It was introduced in 1988 and dominated the World Rally Championship winning several constructors’ championship and an impressive number of competitions up to 1993. Updated in many aesthetic details that made it more muscular and aggressive, as the enlarged fenders and the new designed air intake on the engine bonnet, the Lancia HF Integrale was also improved in driving and engine performance. The 1995 cm3 turbocharged engine increased its power up to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and early 90s, bringing many famous pilots as Miki Biasion or Juha Kankkunen to victory. Detailed Plastic Kit of model Lancia HF Integrale in scale 1:24
Model vehicles 1:24
1:24 Lancia LC2
510003641€37.99
Article number: 510003641 Product: 1:24 Lancia LC2 Model Dim.: 20,0 cm SUPER DECALS SHEET - COLOR INSTRUCTIONS SHEET The LC2 was built by the Italian manufacturer Lancia to compete in the World Sport Prototype Championship at the beginning of ‘80s. Characterized by a clean and elegant design able to optimize the aerodynamic performance, the Lancia LC2 adopted a Ferrari V8 twin-turbocharged engine, prepared by Abarth, with a displacement of 2,599 Cm3 (later increased to 3,014 Cm3). The car made its debut in 1983 competitions where it was able to compete in terms of speed and performance to the Porsche cars, reference point in racing competition at those time. However the lower level of reliability affected the results. A lot of Italian drivers raced on the Lancia LC2 before to became famous in Formula 1 racing as Patrese, Alboreto and Nannini. Detailed Plastic Kit
Model vehicles 1:24
1:24 Land Rover Fire Truck
510003660€37.99
Article number: 510003660 Product: 1/24 Land Rover Fire Truck Length of the model 185 mm New Parts The "Land Rover" was certainly one of the most famous symbols of "Made in England" automobile production and is a real milestone in the history of off-road vehicles. It was born immediately after the war, with the first prototypes realized on 1947. It has been characterized by the 4x4 traction system and by a robust and reliable design able to tackle the most difficult and challenging trails. The aluminum body provide lightness but, at the same time, more resistance against corrosions and more durable in time. In 1971, when the III Series was introduced, more than 1,000,000 of Land Rovers has been produced. Available in two versions: the "standard " one and the "long wheel base". Thanks to its extraordinary versatility was used in both military and civilian duties. Interesting the versions realized for the Fire Departments and made with the firefighting equipment. Detailed Plastic Kit