This website uses cookies. By using the services of this website you consent to the usage of cookies.
OK
Carson TamiyaMajoretteDickie ToysSchuco 
Official  Manufacturer  Shop

1:12 Alfa Romeo 179 / 179C

Detailed plastic kit of model Alfa Romeo 179 / 179C In scale 1:12
€129.99
incl. VAT plus P&P

1:12 FIAT Mefistofele 21706c.c. 1923-25

Article number: 510004701 Product: 1:12 FIAT Mefistofele 21706c.c. 1923-25 The model FIAT Mefistofele in scale 1/12 has a length of about 445 cm. Upgrade Protar Moulds Fiat Mefistofele, the Queen of World Land Speed The one-off racing car "Eldridge", derived from the old Fiat SB4 chassis, became known as Mephistofele for the infernal noise emitted by its powerful aircraft 6-cylinders in-line engine, giving a capacity over 20,000 cm3, not attenuated by exhaust mufflers kept "free" to provide the most significant performance. On 12th July 1924 in Arpajon, the Mefistofele, was able to reach, driven by its pilot and designer Ernest Eldrige, the amazing speed, for the time, of 146,01 miles per hour (over 230 Km/h) and broke the World Land Speed Record achieving an impressive result. The Mefistofele, was characterized by the high back bodywork able to contain the powerful Fiat A-12 liquid-cooled engine and for its structure especially made to achieve the speed record.
€169.99
incl. VAT plus P&P

1:12 Renault RE 20 Turbo

Article number: 510104707 Product: 1:12 Renault RE 20 Turbo Length of the model 383 mm In 1977 the French car manufacturer Renault made its debut in the Formula 1 world championship with a dedicated racing team that introduced important innovations in the world of competition. The F1 Renault team took part in the world championship in the 1980 season with the Renault RE20 powered by a turbocharged V6 Renault Gordini EF1 engine capable of delivering 520 HP. The team was completely French as the team of pilots composed by Jean-Pierre Jabouille, with the racing number 15 and René Arnoux with the racing number 16. During the season the team obtained three victories in the Brazil, South Africa and Austria GP. The Renault 20 series was modified and improved but in 1981 season, after the first five races, it was replaced by the 30 series with a redesigned chassis. Detailed plastic kit   Warning! Not suitable for children under 14 years.
€159.99
incl. VAT plus P&P

1:144 ATR 42 / 500

The model ATR 42 / 500 in 1/144 has al length of about 268 mm. 100% NEW MOULDS STAND BASE INCLUDED DECALS FOR TWO VERSIONS The ATR 42 was developed by the Italian-French manufacturer "Aeromobili da Trasporto Regionale" and making its first flight in the middle of ‘80s. The goal of the project was to create a twin-turboprop passenger aircraft that could be used as short-haul regional airliner. The low operating costs and the possibility to take off and to land on short runways were the main features of the small aircraft and were the base for the commercial success of the project. The ATR-500, introduced in the mid ‘90s, was the improved version and it adopts new engines and six-bladed propellers. Furthermore a dedicated military version, the ATR 42 MP "Surveyor" has been developed to perform maritime patrol duties. It is used by Italian Coast Guard, Capitanerie di Porto and Guardia di Finanza.   Warning! Not suitable for children under 14 years.
€24.99
incl. VAT plus P&P

1:16 Mercedes-Benz 300 SL Gullwing

Article number: 510003612 Product: 1:16 Mercedes-Benz 300 SL Gullwing Length of the model: 286 mm BACK AGAIN! The Mercedes-Benz 300 SL was produced in 1954 by the German car manufacturer and it’s a masterpiece on four-wheels for design, elegance and luxury. The 300 SL, where the acronym stands for Sport Leicht, (Sport Light), adopted innovative solutions for the time. The Mercedes 2 door coupe had a tubular frame, a front 2.996 cc longitudinal engine connected to a 4-speed transmission and the rear drive. The maximum speed of 300 SL was 260 Km/h (162 mph). The real strength of the car, however, was in its innovative design and the adoption of the characteristic and eye-catching Gull-wing doors. Even today the Mercedes-Benz 300 SL is an icon of design and style of the period ant it is a real icon for collectors and fans. Deatailed plastic kit   Warning! Not suitable for children under 14 years.
€57.99
incl. VAT plus P&P

1:18 IT PIAGGIO APE 50 Presidenziale

Article number: 510068007 Product: 1/18 IT PIAGGIO APE 50 Presidenziale Model Dim.: 165 x 80 x 100 mm Ape Calessino, expression of the "Dolce Vita" life – style relives the faithful 1:18 scale replica. Made with Die Cast technology, the model is composed of the metal body, frontal steering wheel and soft rubber tyres. Attention to details with accurate colors and decals. Officially licensed product made by Piaggio & C. S.p.A., available in different versions.
€22.49
incl. VAT plus P&P

1:24 20' Container Trailer

Article number: 510003887 Product: 1:24 20' Container Trailer Length of the model 300 mm 100% NEW TRAILER MOULDS Designed to optimize the logistics of road transport, our trailer for 20" containers or swap bodies is inspired by the FCT model (fixed container transportation) produced by Tecnokar, leader company in high-Quality semi-trailer production and distribution since 1986. With its carefully built structure which offers the right balance between stability, sturdiness and durability, the fixed container transportation chassis is a steel Hbeam chassis with a 2′ fifth wheel coupling kingpin, Jost double-speed retractile oscillating rails and Twist arms with zinc-coated twists. It is also provided with the basic ADR standard equipment. Detailed Plastic Kit of model 20' Container Trailer in scale 1:24   Warning! Not suitable for children under 14 years.
€47.99
incl. VAT plus P&P

1:24 Audi Quattro Rally

Article number: 510003642 Product: 1/24 Audi Quattro Rally SUPER DECALS SHEET In 1980, during the Geneva Motor Show, the German car manufacturer presented to the public its new twodoor coupé called Audi Quattro. Produced for all the '80s the Italian name choosed by Audi (Quattro is the Italian word for "four") ine was pointed out the main feature and the most important selling point : the fourwheel drive. It was the first time that the 4x4 solution was adopted on a coupé with the goal to achieve high numbers in terms of production and sales on the market. The Audi Quattro was able to release good driving performance, thanks to its frontal longitudinal engine, and very good reliability on all type of road conditions. From the mass production a dedicated car for competitions was developed on 1981 and it debuted in the World Rally Championship, achieving good results. The success of "Quattro" cars is still existing today in fact the name has become a real "brand" that identifies all the range of Audi’s four wheel drive production. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.
€29.99
incl. VAT plus P&P

1:24 Australian Truck

The model Australischer Truck in 1/24 scale has a length of about 332 mm. Australian outback truckers covering enormous distances on rugged and unsealed roads needs to equip their rigs with special modifications. They include a huge bull-bar (roo-bar), a sheet of wire mesh for windscreen protection, special dust filters, additional long range fuel tanks, heavy duty wheels, airconditioning and an array of different driving lights. Bulk goods are normally transported in Road Trains, which can have up to 3 trailers with a total length of over 31 metres.   Warning! Not suitable for children under 14 years.
€54.99
incl. VAT plus P&P

1:24 BERLIET R352ch / RENAULT R360

Art.Nr.: 510003902 Art.bezeichnung: 1/24 BERLIET R352ch / RENAULT R360 The model BERLIET R352ch / RENAULT R360 in 1/24 scale has a length of about 266 mm. DECALS for 2 VERSIONS The Renault R360 was presented on the market in 1980 but it was a well known and already appreciated truck. In fact it was derives directly from the truck of the French company Berliet that became part of the Renault group in 1974. The new range of "heavy" trucks has been identify by the R letter followed by a number representing the engine horsepower. The Renault R360 was characterised by the adoption of a modern turbocharged 8V cylinders diesel engine capable of deliver 356 horsepower. From the "light" 4x2 version with a gross total weight of 19 tons to the "heavy" version with a gross total weight of 44 tons, the range was large and able to match several customers needs. One of the strengths or "R" truck series was the modern cabin with a comfort on board at the highest level for the standards of the time The "R" series has had, thanks to Renault sales and service network, a good commercial success. Deatailed plastic kit of model BERLIET R352ch / RENAULT R360 in scale 1:24   Warning! Not suitable for children under 14 years.
€51.49
incl. VAT plus P&P

1:24 Classic Canvas Trailer

Article number: 510003908 Product: 1/24 CLASSIC CANVAS TRAILER The model CLASSIC CANVAS TRAILER in1/24 scale has a length of about 505 mm. The tractor-trailer units with 3-axle trailer are dominating the European long-distance transport. The most common variants are the canvas-container and reefer trailer. Due to the heavy competition in long-distance hauling the owners are forced to utilize the weight limit of 40 tons of a track unit. This requires the application of modern materials like aluminum and plastic in the trailer construction, to keep the weight as low as possible. This trailer can be combined with all Italeri Trucks to impressive units. Detailed Plastic Kit of model Classic Canvas Trailer in scale 1:24   Warning! Not suitable for children under 14 years.
€51.99
incl. VAT plus P&P

1:24 Curtainside Trailer

Length of the model: 580 mm TRACTOR NOT INCLUDED IN THE BOX SUPER DELAS SHEET with tractor decals included NEW WHEELS During the last few years the Curtainside became more and more the standard trailer for various freight transport. Due Due to the possibility to slide the canvas sides, it is easy to load and unload merchandise. Our model represent a 3-axle trailer with frame protection and solid tail gates, as it is generally used all over Europe.
€49.99
incl. VAT plus P&P

1:24 DAF 95 CANVAS

Article number: 510003914 Product: 1/24 DAF 95 CANVAS Length of the model: 378 mm Many experts today accept DAF as a trendsetter for trucks. Victories at the Paris-Dakar Rally and very economical features have contributed to the success of DAF trucks. "Concept 95/380" has been the flagship of the DAF fleet and the latest edition to the truck range of DAF. The model has many technical improvements over its predecessors: a remarkable noise reduction, 4-point shock absorbers and air suspension which create bus-like travelling conditions. This truck is powered by the powerful six-cylinder engine with ATI (Advanced Turbo Intercooling). Detailed Plastic Kit of model DAF 95 CANVAS in scale 1:24
€51.99
incl. VAT plus P&P

1:24 Dumper Trailer

The model Dumper Trailer in 1/24 scale has a length of about 370 mm. This great three axis trailer has been developed for earth and building debris transportation within construction sights. Equipped with high resistant steel chasse, it is capable to support stress on unpaved working areas. Characterized by a large tipping bucket capable of several tons payload. This trailer has installed with an efficient braking system enabling to guarantee maximum safety during transportation. It is further has a bucket covering system to eliminate loss of material risks while moving.   Warning! Not suitable for children under 14 years.
€55.99
incl. VAT plus P&P

1:24 Fiat "500" (2007)

Article number: 510003647 Product: 1:24 Fiat "500" (2007) Length of the Model 148 mm In 2007, the Fiat Group presented the successor to the most iconic car of Italian automotive production: the Fiat 500. The new model features a distinctive design and interesting retro-style as modern reinterpretation of the "classic" Fiat 500 launched on the market in 1957. Thanks to its unique design, the adoption of the most innovative technological and safety solutions, the Fiat 500 is positioned on the market as a premium city car, accessible but at the same time exclusive. The wide range of versions and accessories enhance the possibility for the customer to personalize the car and make it unique. From its release on the market the car adopted several engines from the twin-cylinder petrol 895cc "Twinair" to the four-cylinder diesel 1,248 cc "Multijet Detailed Plastic Kit   Warning! Not suitable for children under 14 years.
€27.99
incl. VAT plus P&P

1:24 Fiat 131 Abarth Rally

Article number: 510003662 Product: 1:24 Fiat 131 Abarth Rally Length of the model 174 mm SUPER DECAL SHEET EXTRA CATALOGUE The Fiat 131 Abarth was built on the frame of the two-door Fiat sedan. The development made by Abarth considered several modifications and improvements starting from the reduction of the body weight using lighter materials. Then some new fenders, to permit the adoption of larger wheels, were installed and new air-intakes on the hood and on the sides to optimize the cooling of the mechanics were designed. The engine was a 4-cylinder longitudinal engine characterised by the use light alloy head and 4 valves per cylinder. The Fiat 131 Abarth was built from 1976 and it was used in the World Rally Championship where achieved important results as three manufacturers’ championship, one pilots’ championship and one FIA trophy. It took part in international competitions until 1982 when it was replaced by the Lancia brand cars. Detailed Plastic Kit of model Fiat 131 Abarth Rally in scale 1:24
€29.99
incl. VAT plus P&P

1:24 Ford Escort Mk.II

Article number: 510003655 Product: 1:24 Ford Escort Mk.II Length of the model 165 mm The Ford Escort Mk 2 was launched in 1975. It was a significant evolution compared to the Escort Mk 1 that debuted at Brussels Motor Show in January 1968. It used the reliable mechanical components as the Mk 1 but adopted a new design based on a squared-style look able to be in line with the aesthetic and stylistic taste of the 70s. The product range was wide, declined in three Body styles (2 doors, 4 doors and 3 doors station wagon), five type of engines and a significant variety of settings and configurations. The Escort Mk 2 was mainly produced in the Ford Group German plants and achieved a good commercial success. In addition to the more classic version, it was also released the Escort Sport version characterized by a more aggressive look and distinctive Sport interiors. To compete, successfully, in World Rally Championship, a dedicated model, the RS 1800, was introduced to complete the line up. Detailed Plastic Kit of model Ford Escort Mk.II in scale 1:24
€28.99
incl. VAT plus P&P

1:24 Ford Transit Mk. II

Article number: 510003687 Product: 1/24 Ford Transit Mk. II Length of the model: 192 mm THIS MODEL IS A RIGHT & LEFT-HAND DRIVE Transit is a light commercial vehicles series produced since 1953 by Ford Germany and Ford UK and conceived for European market. The front engine of these vehicles allows to have a lower loading bed, which eases the loading process. Anyway the very first Transit was produced in 1965 by the German and British Ford together, expressly wanted by Henry Ford; this cooperation gave life to what is Ford Europe today and to the well-known vehicle MK I. In 1978 it was further reshaped and the MK II was born. In 1984 an esthetic restyling was made on the front bumper and to the engine, which was a 68 horsepower Diesel York of 2498 cbm. These vehicles have been a commercial success not only in Europe, as still today they are in production also for extra European markets. Detailed Plastic Kit of model Ford Transit Mk. II in scale 1:24   Warning! Not suitable for children under 14 years.
€31.99
incl. VAT plus P&P

1:24 Ford Transit UK Police

Article number: 510003657 Product: 1:24 Ford Transit UK Police Length of the model 185 mm The Ford Transit is a light commercial vehicle range which first entered production in 1965 as a Joint venture between Ford Germany and Ford Great Britain. Prior to 1965 there had been a Ford Taunus Transit which was built by Ford of Germany in 1953. The Ford Transit Mk.2 was produced from 1978 – 1986. This Van was produced in both Fords Genk factory in Belgium as well as in Fords UK factories, initially in Langley before moving to Southampton due to higher demand than originally expected. This version depicts a Police Control Vehicle as used by the Metropolitan Police Force in the 1980’s. They were usually used during major traffic incidents, and during major public events, such as football matches, concerts, New Year celebrations etc. This 1:24 scale kit contains five separate sprues and can be built up both as a LHD or RHD version. Detailed Plastic Kit of model Ford Transit UK Police in scale 1:24
€31.99
incl. VAT plus P&P

1:24 Freightliner FLD 120 (Classic)

Article number: 510003925 Product: 1:24 Freightliner FLD 120 (Classic) Model Dim.: 32,5 cm CONTAINS 2 CHROMED SPRUE - SUPER DECALS SHEET FOR 2 VERSIONS - COLOR INSTRUCTIONS SHEET Founded in 1942, with more than 70 years of activity in the commercial and industrial vehicles industry, the Freightliner Trucks company, is a piece of the road transportation history in the United States. Since 1981 the owner is the multinational corporation Daimler AG that reinforced the role of Freightliner to be a reference point on the market. One of its icons is the Freightliner FLD that was introduced on the market in 1987. It is characterized by an aerodynamic design, applied to the "conventional tractor", that was very innovative for the time. The Freightliner FLD remained in production for many years until the beginning of the 2000. A lot of versions were produced with special configurations and outfittings able to satisfy every kind of transport need. The FLD was an excellent platform for the customization and for the creativity of the American "truck drivers". Detailed Plastic Kit of model Freightliner FLD 120 (Classic) in scale 1:24   Warning! Not suitable for children under 14 years.
€49.99
incl. VAT plus P&P

1:24 IVECO HiWay - 40. Iveco Anniversary

Iveco, to celebrate the 40 years anniversary from its foundation, has created an exclusive special version of its famous heavy track Stralis Hi-Way. The external design is characterized by a metallic blue livery with gray band that cuts the center grille. The interiors are really excusive with a dedicated set of premium details. The Stralis Hi-Way is the latest evolution of the famous heavy duties truck produced by Iveco. The Stralis Hi-Way is characterized by several technological and aesthetic improvements compared to previous versions. The cabin offers a completely new design and is equipped with integrated electronic systems able to optimize the on-board comfort and to provide the highest safety standard. The evolution of the Stralis is also characterized by a completely new "powertrain" able to minimize the fuel consumption and the maintenance costs. In 2013 Iveco Stralis Hi-Way won the "International Truck of the Year" award assigned by a pool of journalists of the most important European trucks magazines.
€59.99
incl. VAT plus P&P

1:24 IVECO STRALIS Active Space

Article number: 510003869 Product: 1/24 IVECO STRALIS Active Space The model IVECO STRALIS Active Space in 1/24 scale has a length of about 237 mm. 100% NEW MOULDS - DECALS FOR 2 VERSIONS The IVECO Stralis is, without doubt, one of the most popular tractors present today on the European highways. IVECO has obtained several success in the tractors and semi-trailer trucks business such as the Turbostar in the 80’s, the Eurostar and the Eurotech The Stralis, launched in 2002, is the last generation tractor developed by the Italian company. The powertrain was developed around the 8, 10 and 13 liters, 6-cylinders lay out, Cursor engine. The Cursor engine range, thanks to its turbocharged technology, is capable of delivering up to 560 H.P. The Stralis is mainly built in the configuration 4x2 with 2 axles 6x2 with 3 axles. From the first types, the manufacturer has developed several versions with various improvements. The most significant improvements, with the specific goal to guarantee the highest on board comfort level, have concerned the cab.
€53.99
incl. VAT plus P&P

1:24 Lamborghini Countach 25th Anniv.

Length of the model: 180 mm Final version of the glorious Countach, dedicated to the 25th anniversary of Lamborghini, boasts numerous improvements, were in fact changed about 3,000 of the 8,000 pieces that make up the car. Much of the aesthetic innovations derived from the prototype Countach Evoluzione in 1986, the first supercar in the world made of carbon fiber. The air box and the air intakes were redesigned and enlarged and were mounted of miniskirts , the geometry of the suspension was modified. The improved aerodynamics allowed a maximum speed of 300 km / h. This was the last version made the Countach, which remained in production until 1990 when it was replaced by the Diablo.
€26.49
incl. VAT plus P&P

1:24 Lamborghini Diabolo

Length of the model: 186 mm The Diablo was produced between 1990 and 2001. During this period, Lamborghini introduced several variations of the Diablo concept, the first being the Diablo VT (Visco Traction), which featured an all-wheel drive. The Diablo was destined to become the worthy heir of the renowned Miura and Countach. This newsupercar was wide, low and futuristic. And just like its predecessors, the Diablo soon became a favorite among car enthusiasts across the world. The Diablo models helped build the legend of Lamborghini and sold well. Almost 3,000 units across all series and variations found their buyers in those eleven years of evolution. The Lamborghini bosses had wished for a maximum speed of at least 320 kph, and the engineers made this wish come true: With a top speed of 325 kph and an acceleration from 0-100 in 4.5 seconds the Diablo claimed the pole position in the super sports cars segment. It delivered its power via a rear-wheel drive and came with a newly developed V12 engine. Four valves per cylinder, a computer controlled multi-point fuel injection and a displacement of 5.7 liters helped produce a maximum of 492 HP.
€26.49
incl. VAT plus P&P

1:24 Lamborghini Miura

Article number: 510003686 Product: 1/24 Lamborghini Miura Length of the model: 180 mm Very few cars manage to change the automobile world like the Miura. With its central V12 engine and fascinating body, designed by Marcello Gandini for Bertone, the two-seater redefined the concept of a sports car. At its debut the Miura was the fastest car produced in the world: with a top speed of 280 kph and an acceleration from 0-100 kph in 6.7 seconds, the Lamborghini Miura set new standards in the sport car segment. The original Miura was produced between 1966 and 1969. But the successful story did not end there: the Miura was first developed further into the Miura S with 370 HP and later into the Miura SV, which had wider mud guards and a greatly revamped 385 HP engine with separate lubricating systems for engine and gearbox. Detailed Plastic Kit of model Lamborghini Miura in scale 1:24
€24.99
incl. VAT plus P&P

1:24 Lamborghini Miura Jota SVJ

Article number: 510003649 Product: 1:24 Lamborghini Miura Jota SVJ Length of the model 187 mm NEW MOULDS The Lamborghini Miura was produced by the Italian manufacturer between 1966 and 1973. The Miura, when it was presented on the market, was a real supercar characterized by high performance and innovative design. In 1970, on the layout of the Miura, a specific version dedicated for the competitions was created through improvements on chassis and suspensions. Other significant changes where implemented on engine power and on the braking system. The commercial name of this unique car with a power of 440 Hp and outstanding performances was "Jota". However, due to several requests from customers, Lamborghini modified some Miura SV series with specification similar to Jota. These cars were identified by the acronym SVJ and became soon the dream of car experts and funs all over the World. Detailed Plastic Kit of model Lamborghini Miura Jota SVJ in scale 1:24   Warning! Not suitable for children under 14 years.
€27.99
incl. VAT plus P&P

1:24 Lancia LC2

Article number: 510003641 Product: 1:24 Lancia LC2 Model Dim.: 20,0 cm SUPER DECALS SHEET - COLOR INSTRUCTIONS SHEET The LC2 was built by the Italian manufacturer Lancia to compete in the World Sport Prototype Championship at the beginning of ‘80s. Characterized by a clean and elegant design able to optimize the aerodynamic performance, the Lancia LC2 adopted a Ferrari V8 twin-turbocharged engine, prepared by Abarth, with a displacement of 2,599 Cm3 (later increased to 3,014 Cm3). The car made its debut in 1983 competitions where it was able to compete in terms of speed and performance to the Porsche cars, reference point in racing competition at those time. However the lower level of reliability affected the results. A lot of Italian drivers raced on the Lancia LC2 before to became famous in Formula 1 racing as Patrese, Alboreto and Nannini. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.
€31.99
incl. VAT plus P&P

1:24 Land Rover Fire Truck

Article number: 510003660 Product: 1/24 Land Rover Fire Truck Length of the model 185 mm New Parts The "Land Rover" was certainly one of the most famous symbols of "Made in England" automobile production and is a real milestone in the history of off-road vehicles. It was born immediately after the war, with the first prototypes realized on 1947. It has been characterized by the 4x4 traction system and by a robust and reliable design able to tackle the most difficult and challenging trails. The aluminum body provide lightness but, at the same time, more resistance against corrosions and more durable in time. In 1971, when the III Series was introduced, more than 1,000,000 of Land Rovers has been produced. Available in two versions: the "standard " one and the "long wheel base". Thanks to its extraordinary versatility was used in both military and civilian duties. Interesting the versions realized for the Fire Departments and made with the firefighting equipment. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.
€31.99
incl. VAT plus P&P

1:24 M-B Actros MP4 Show GigaSpace

Article number: 510003935 Product: 1/24 M-B Actros MP4 Show GigaSpace Length of the model 269 mm NEW CHROMED PARTS SUPER DECALS SHEET Actros is the commercial name for Mercedes-Benz heavy truck range. The Actros range has been introduced in 1995 and quickly achieved a significant commercial success as a suitable solution to perform long-distance haulage and heavy-duties haulage. The New Actros, introduced on the market in 2012, is the most update and innovative expression of the heavy truck Mercedes family. It is characterised by an advanced and modern design and the adoption of new Euro 5 and Euro 6 engines. The vehicle configuration has been designed and developed to guarantee the highest operational efficiency minimising the running costs. Among the several configurations available it is particularly interesting the long-haul high-roof cabin version, design to offer the highest standard of comfort on board for two drivers. The Actros is also a good starting base to create fantastic ShowTrucks with liveries and graphics characterized by a high visual impact that are real masterpieces on wheels. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.
€63.99
incl. VAT plus P&P

1:24 MAGIRUZ DEUTZ 360M19 Canvas Truck

Length of the model: 370 mm SUPER DECALS SHEET FOR 2 VERSIONS The "360M19" has been produced by the German Magirus Deutz when the company was incorporated in Iveco Group. The truck is a good synthesis of all the strengths that made, the German manufacturer and outfitter, famous in the 70s and in the early 80s in the truck World. The sturdy chassis developed to perform "heavy duties", the rear axle with twin wheels, the leaf springs shock absorbers and the forward cabin derived by Iveco range, made it suitable to be an ideal platform for outfitting and special configurations. The truck adopted the V-10 Deutz Diesel engine, air cooled, that provide the possibility to reach 110 km / h. It was equipped with a 5-speed gearbox with reduced.
€59.99
incl. VAT plus P&P

1:24 MAN TGX XLX

Article number: 510003895 Product: 1/24 MAN TGX XLX The model MAN TGX XLX in 1/24 Scale has a length of about 257 mm. - FULLY UPGRADED MOULDS - SUPER DECALS SHEET FOR 2 VERSIONS - ADDITIONAL CHROMED PARTS - SUPER CHROMED ADHESIVES With the new TGX range, MAN brings to the streets of Europe a new protagonist with a strong aesthetic impact. A vehicle with style and character that translates driving and space in a most exemplary manner, and redefines the standards of dynamic driving and profitability. The surprising aerodynamics reduce the fuel consumption by 3%. The XLX cab has the highest comfort and optimum freedom of movement on international scheduled routes. The innovative D2066, D2676 and D2868 engines with power ratings from 320 Hp (235 kW) to 680 hp (500 kW) demonstrate the progress. The modern diesel engine version EURO 5 develops more power with less fuel consumption and delivers a longer life. FULLY UPGRADE MOULDS SUPER DECALS SHEET & NEW CHROMED PARTS   Warning! Not suitable for children under 14 years.
€59.99
incl. VAT plus P&P

1:24 MAN TGX XXL D38 E6 Edition

Article number: 510003916 Product: 1:24 MAN TGX XXL D38 E6 Edition Model Dim.: 25,7 cm UPGRADED MOULDS An interesting version of the famous German heavy truck characterized by an impressive, in perfect synergy with the design of the cabin, Arctic livery. The MAN TGX XXL is recognized by the commercial and industrial vehicles market as a reference point for its style and its personality. The development of the truck has been done taking in consideration the effectiveness and the performance in long range duties. The aerodynamic design of the truck is able to minimize the fuel consumption. Furthermore The XXL cabin offers maximum comfort on board and it can be considered an ideal solution for international long haul commercial activities. The range of engines has been developed to minimize the running and operating costs and ensure a longer working life. Detailed Plastic Kit of model MAN TGX XXL D38 E6 Edition in scale 1:24
€54.99
incl. VAT plus P&P

1:24 Mercedes Benz 300 SL Gull Wing

Article number: 510003645 Product: 1:24 Mercedes Benz 300 SL Gull Wing Length of the model 148 mm The Mercedes-Benz 300 SL was produced in 1954 by the German car manufacturer and it’s a masterpiece on four-wheels for design, elegance and luxury. The 300 SL, where the acronym stands for Sport Leicht, (Sport Light), adopted innovative solutions for the time. The Mercedes 2 door coupe had a tubular frame, a front 2.996 cc longitudinal engine connected to a 4-speed transmission and the rear drive. The maximum speed of 300 SL was 260 Km/h (162 mph). The real strength of the car, however, was in its innovative design and the adoption of the characteristic and eye-catching Gull-wing doors. Even today the Mercedes-Benz 300 SL is an icon of design and style of the period ant it is a real icon for collectors and fans. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.
€27.99
incl. VAT plus P&P

1:24 Mercedes Benz Actros MP4 Gigaspace

Article number: 510003905 Product: 1:24 Mercedes Benz Actros MP4 Gigaspace Length of the model 269 mm 100% NEW MOULDS Actros is the commercial name for Mercedes-Benz heavy truck range. The Actros range has been introduced in 1995 and quickly achieved a significant commercial success as a suitable solution to perform longdistance haulage and heavy-duties haulage. The New Actros, introduced on the market in 2012, is the most update and innovative expression of the heavy truck Mercedes family. It is characterized by an advanced and modern design and the adoption of new Euro 5 and Euro 6 engines. The vehicle configuration has been designed and developed to guarantee the highest operational efficiency minimizing the running costs. Among the several configurations available it is particularly interesting the "GigaSpace", long-haul high-roof cabin version, design to offer the highest standard of comfort on board for two drivers. Thanks to its features, Actros Gigaspace can be considered one the best solution for international long-distance transport activities. Detailed Plastic Kit of model Mercedes Benz Actros MP4 Gigaspace in scale 1:24   Warning! Not suitable for children under 14 years.
€59.99
incl. VAT plus P&P

1:24 Mercedes Benz SK Eurocab 6x4

Article number: 510003924 Product: 1:24 Mercedes Benz SK Eurocab 6x4 Length of the model 270 mm In 1993 the most powerful Mercedes-Benz Truck with more than 500 HP, was introduced as the «Eurocab» with a raised roof cabin. Equipped with the same cab, two more engine versions are available, 380 HP and 435 HP. Contrary to many other truck manufacturers, most part assemblies such as transmission, engine etc. are produced by Mercedes in house. Power source is a V-8 turbo-charged Diesel engine, 14.6 l, with an output of up to 503 HP. Despite of ist high roof, the Eurocab features a roof spoiler to reduce fuel costs to a minimum. All Mercedes Trucks are built according to the new European noise and Emission control regulations. Detailed Plastic Kit of model Mercedes Benz SK Eurocab 6x4 in scale 1:24   Warning! Not suitable for children under 14 years.
€49.99
incl. VAT plus P&P

1:24 Mercedes-Benz 2238 6x4

Article number: 510003943 Product: 1/24 Mercedes-Benz 2238 6x4 NEW DECAL SHEET The truck 2238 S 6 x 4 has been, for long time, the reference point for heavy duties on long range of Mercedes. The truck had both rear axles driven and a total of 375 horsepower. It was one of the heaviest Mercedes long distance truck and it had established new dimensions in international long distance traffic. The features of the engine OM422 allowed a particularly economic driving. The gear changes was reduced to a minimum, thus guaranteeing very smooth driving. It achieved a good commercial success all over the world. It’s reliable chassis was a platform to develop customization and dedicated versions for specific needs. It can be considered a starting point for the development of the next generations of road vehicles. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.
€53.99
incl. VAT plus P&P

1:24 Mercedes-Benz Actros 2003

The model Mercedes-Benz Actros 2003 in 1/24 scale has a length of about 242 mm. This latest generation of Mercedes Benz Actros trucks was launched on the market in Spring 2003. Used to transport heavy loads over long distances, these models differ from their predecessors mainly as regards safety, running costs and driver comfort. The most significant developments are to be found in the drive cab interior (designed to satisfy even the most demanding truckers), the ever-more powerful engines and the technical improvements made to the drive axle. Externally, the new Actros trucks are characterised by the radiator grill, which have the fins set more widely apart to increase air flow and the new lights with super-clear casings and variable-focus reflectors. All Actros engines are of the new V-type Series 500: the V8 engine installed on the 1854 LS version provides from 503 to 578 HP.   Warning! Not suitable for children under 14 years.
€53.99
incl. VAT plus P&P

1:24 MercedesBenz Actros 1851 Blackliner

Article number: 510003884 Product: 1/24 MercedesBenz Actros 1851 Blackliner The model MercedesBenz Actros 1851 Blackliner in 1/24 scale has a length of about 242 mm. FULLY UPGRADE MOULDS - SUPER DECALS SHEET FOR 2 VERSIONS The Actros Edition Black Liner and White Liner is the most exclusive and attractive form of star-branded long-distance truck. On the outside perfectly attired, from the metallic paintwork to the decorative stripes, and inside perfectly equipped, from special leather seats to Active Brake Assist, the new Mercedes-Benz Actros Edition showcases the brand. Mercedes-Benz delivers the Actros Edition Black Liner and White Liner in conjunction with L-cab and Megaspace cab and all engine variants. The number of trucks being produced is as exclusive as the equipment: the Edition is limited to 500 vehicles. The Mercedes-Benz Actros Edition made its debut at the IAA Commercial Vehicles in Hannover at the end of September 2010.   Warning! Not suitable for children under 14 years.
€53.99
incl. VAT plus P&P

1:24 Peterbilt 378 "Long Hauler"

The model Peterbilt 378 Long Hauler in 1/24 scale has a length of about 322 mm.   Warning! Not suitable for children under 14 years.
€55.99
incl. VAT plus P&P

1:24 Porsche 956

Article number: 510003648 Product: 1:24 Porsche 956 Length of the model 199 mm SUPER DECALS SHEET The Porsche 956 was built by the German manufacturer in 1982 to participate in the World Sport-Prototype Championship in the new Group C category. The "956" was a radical revolution compared to the previous Porsche 936 that won several competition between 1976 and 1981. Porsche to be comply with the new championship’s regulations introduced on the new "956" several technical innovations as the aerodynamic solutions and the aluminium monocoque chassis. The engine was the reliable 2,650 cm3 6 cylinders turbocharged engine able to release 635 Hp. Porsche 956 proven to be an effective and successful Sport car winning several Sport-Prototype Championships and four editions of the famous 24 Hours of Le Mans the World’s oldest sport car race in endurance racing. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.
€29.99
incl. VAT plus P&P

1:24 Racing Trailer

Article number: 510003936 Product: 1:24 Racing Trailer The box includes the trailer only Model Dim.: 56,5 cm SUPER DECALS SHEET The "racing trailers" are widely used by the most important racing teams to transport the cars, from the single-seat Formula 1 cars to the World Rally Championship cars. Furthermore the trailers are used by the two-wheel racing teams to transport the bikes, from the Moto GP World Championship to the Superbike races. The inner space of the trailers are optimized to permit the highest level of safety and care of the cars and motorbikes during the transportation. Not only. The trailers are also important communication tools for the teams, enhancing the manufacturers brands and the several technical and commercial sponsors. The presence of the eye-catching racing trailers in the Paddocks of the sports circuits is a real "must" for all international competition.
€59.99
incl. VAT plus P&P

1:24 Range Rover Police

Article number: 510003661 Product: 1:24 Range Rover Police Length of the model 241 mm The Range Rover Classic can be considered a milestone in the history of off-road vehicles. It was produced in numerous variants and versions from 1970 to 1996. It was the first vehicle produced under the "Range Rover" brand and from 1981 it was available in the two- or four-door version. Thanks to its 4x4 traction and its sturdy structure, simple for construction but very reliable, the Range Rover was able to achieve very good off-road performances. The vehicle was able to obtain, very soon, good commercial success all over the World. The Range Rover, furthermore, was widely used by bodybuilders to create numerous special versions able to satisfy satisfy all types of needs. It has also been used by Police Departmets, Security Services and a lot of Public Services Fleet. Detailed Plastic Kit of model Range Rover Police in scale 1:24
€31.99
incl. VAT plus P&P

1:24 Reefer Trailer

Article number: 510003904 Product: 1:24 Reefer Trailer The model Reefer Trailer in 1/24 scale has a length of about 587 mm. NEW WHEELS This latest-generation semitrailer is representative of much of Europe’s on-road haulage vehicles. Featuring an efficient braking system, side impact protection, a considerable load capacity, these trailers are used extensively and are produced by at least ten or so specialised companies, which provide a comprehensive range of variants to meet the specific needs of individual customers. Detailed Plastic Kit of model Reefer Trailer in scale 1:24   Warning! Not suitable for children under 14 years.
€59.99
incl. VAT plus P&P

1:24 Renault AE500 Magnum (2001)

Article number: 510003941 Product: 1:24 Renault AE500 Magnum (2001) Length of the model 241 mm Since the date of introduction on the market, in the 1990s, the industrial vehicles Renault Magnum range obtained a rapid commercial success with a lot of units sold. In 2001 the French Company presented a new version characterized by an extensive restilyng with a lot of improvement and changes, such as a new grill, a new roof spoiler, and a modified dashboard. The imporvemnts were realised to have a better commercial appeal and to be more in line with the changes in customers' needs. The engine has been re-designed to improved fuel-efficiency. The cabin, offering top comfort to the driver, can be tilted by almost 90° forward for maintenance and was in the top category as far as comfort is concerned. Detailed Plastic Kit of model Renault AE500 Magnum (2001) in scale 1:24   Warning! Not suitable for children under 14 years.
€59.99
incl. VAT plus P&P

1:24 Scania R400 Streamline (Flat Roof)

Article number: 510003947 Product: 1:24 Scania R400 Streamline (Flat Roof) Length of the model 247 mm DECALS SHEET FOR 2 VERSIONS The Scania R-series Streamline is designed to meet the highest demands in terms of fuel economy, driver comfort and reliability. The unique style of the exterior is combined with new exceptional interiors offer exceptional driver comfort and a wide range of choices of colors and materials. Available with both V8 engines and online. Robust, responsive and efficient, the Scania V8 engines are built to carry out the toughest jobs. Our model is also completed by a decals sheet and an accurate sheet of metallic adhesive, already ready for the application, for a correct finishing of the tractor vehicle, exactly as in the real. Detailed Plastic Kit of model   Warning! Not suitable for children under 14 years.
€51.99
incl. VAT plus P&P

1:24 SCANIA R560 V8 Highline Red Griffin

The model SCANIA R560 V8 Highline Red Griffin in 1/24 scale has a length of about 247 mm. FULLY UPGRADED MOULDS - SUPER DECALS SHEET - CHROMED WHEEL RIMS - CHROMED ADHESIVE The new Scania R-series is designed to meet the highest demands in terms of fuel economy, driver comfort and reliability. The exterior design gives the vehicle an impressive sight on the road. The unique style of the exterior is combined with new exceptional interiors offer exceptional driver comfort and a wide range of choices of colors and materials. The version HIGHLINE provides maximum interior space and an almost flat floor. Available with both V8 engines and online. Robust, responsive and efficient, the Scania V8 engines are built to carry out the toughest jobs. Our model is also completed by a fantastic decals sheet and an accurate sheet of metallic adhesive, already ready for the application, for a correct finishing of the tractor vehicle, exactly as in the real.   Warning! Not suitable for children under 14 years.
€58.99
incl. VAT plus P&P

1:24 SCANIA R620 Blue Shark

Article number: 510003873 Product: 1/24 SCANIA R620 Blue Shark The model SCANIA R620 Blue Shark in1/24 scale has a length of about 242 mm. SUPER DECALS SHEET - CHROMED WHEELS - CHROMED ADHESIVE A new link joins the prestigious chain of limited editions launched by SCANIA in Italy (TOP CLASS in 2002, THE KING in 2003 and THE GRIFFIN in 2006) and created in collaboration with "SVEMPAS AB", the famous Swedish coach builder Sven Erik "Svempa" Bergendahl. The top of the line, meaning the street tractor R 620 LA 4x2 MNA Euro 5, dream of many drivers and transport operators, is supplied with the most exclusive technical equipment and additionally embellished with an exclusive series of accessories and particular finishes; this is Blue Shark in synthesis, available from April 2008 in 40 pieces exclusively for the Italian market. Among the most characteristic features we find the Platinum version CR19 TOPLINE cabin, hill-hold system, xenon headlights on bumper and sunshield, the cabin completely painted in metallic blue with glossy black finishes, exclusive cabin exterior and skirt decorations, leather upholstered wheel-front dashboard, 20" TV/DVD and much more.   Warning! Not suitable for children under 14 years.
€59.99
incl. VAT plus P&P

1:24 SCANIA R620 V8 New R Series

The model SCANIA R620 V8 in 1/24 scale has a length of about 250 mm. The new Scania R series heavy tractor is designed to meet the highest demands in the world: fuel economy, driver comfort and relibility. it's strong exterior styling is an impressive sight for everyone. The new restylized cab appearance is fully matched with the new interiors with outstanding driver comfort with a wide colors and equipment options. The Scania R tractor offers the widest choice of powertrain options in the market, so this truck could be easly configured on various needs. This new Scania R series truck is also equipped with the new and unique Scania Drive Support system as standard feature with the EBS and the innovative GRS/GRSO gearbox.
€51.49
incl. VAT plus P&P

1:24 SCANIA R730 "The Griffin"

The model SCANIA R730 "The Griffin" in 1/24 scale has a length of about 247 mm. SUPER DECALS SHEET - CHROMED WHEELS - CHROMED ADHESIVE The Scania R series heavy tractor is designed to meet the highest demands in the world: fuel economy, driver comfort and relibility. it's strong exterior styling is an impressive sight for every one. The new restylized cab appearance is fully matched with the new interiors with outstanding driver comfort with a wide colors and equipement options. The Sania R tractor offers the widest choice of powertrain options in the market, so this truck could be easly configured on various needs. This new Scania R series truck is also equipped with the new and unique Scania Drive Support system as standar feature with the EBS and the innovative GRS/GRSO gearbox.This model is equipped with a special livery decals from "Griffin" that has had great success with European drivers: the classic Scania logo is revised here in a colorful and aggressive symbol of the Swedish version of the raptor. The model is also completed by an accurate sheet of metallic adhesive, which is ready for application, for a correct and complete finishing of the tractor vehicle, exactly as in the real.   Warning! Not suitable for children under 14 years.
€58.99
incl. VAT plus P&P

1:24 SCANIA R730 Streamline "Chimera"

Article number: 510003930 Product: 1:24 SCANIA R730 Streamline "Chimera" Length of the model 247 mm SUPER DECALS, CHROMED RIMS AND NEW TIRES The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the current world market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series Streamline version, produced in 2013, is designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road and is considered the number one for "SHOW TRUCKS", the famous decorated tractors. The extraordinary exterior style is matched with exclusive new interiors which provide exceptional comfort for the driver and a wide range of color and material options. Our model reproduce in 1:24 scale the tractor created by the well-known Swedish company SVEMPAS AB, for the technical assistance of the tractor in the racing version called SCANIA "CHIMERA". Detailed Plastic Kit of model SCANIA R730 Streamline "Chimera" in scale 1:24   Warning! Not suitable for children under 14 years.
€59.99
incl. VAT plus P&P

1:24 SCANIA R730 Streamline Highline Cab

Article number: 510003932 Product: 1:24 SCANIA R730 Streamline Highline Cab Model Dim.: 24,7 cm SUPER DECALS SHEET The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the recent World market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series Streamline version, produced in 2013, was designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road The continuous evolution of the cabin allowed to reach the highest levels of driving comfort and habitability even in the most demanding long-haul commercial Transport activities. Detailed Plastic Kit of model SCANIA R730 Streamline - Highline Cab in scale 1:24   Warning! Not suitable for children under 14 years.
€54.99
incl. VAT plus P&P

1:24 Scania R730 V8 Black Amber

The model SCANIA R730 V8 BLACK AMBER in 1/24 scale has a length of about 247 mm. With special Amber Metallic acrylic paint 30ml included. In 2011, a new link was added to the prestigious chain of limited editions launched by Scania (TOP CLASS in 2002, THE KING in 2003, THE GRIFFIN in 2006, BLUE SHARK in 2008 and DARK DIAMOND in 2009) and created in partnership with "SVEMPAS AB", the famous Swedish truck manufacturer Sven Erik "Svempa" Bergendahl. The top of the range, or the road tractor R 730 LA4x2MNA Euro 5 V8 engine, the dream of many drivers and transport operators, is equipped with the most exclusive technical features and further enhanced with an exclusive range of accessories and special finishes. The most characteristic feature is the CR19 TOPLINE cabin in the TITANIUM version. Exclusive "Black Amber" metallic paint for the cab and plastic parts. Black Amber silkscreen with elegant flame pattern in carbon black with clear amber outline, ESP, LED brake lights on spoiler, xenon headlights in the sun visor and side lights integrated with the running boards, unique decorations outside cabin and side skirts, front instrument panel and steering wheel covered with leather, 22" TV/DVD and much more. With special Amber Metallic Acryl paint (30 ml) included   Warning! Not suitable for children under 14 years.
€59.99
incl. VAT plus P&P

1:24 Scania R730 V8 Topline Imperial

Article number: 510003883 Product: 1/24 Scania R730 V8 Topline Imperial The model Scania R730 V8 Topline Imperial in scale 1/24 has a length of about 247 mm. SUPER STICKERS & DECALS SHEET ADDITIONAL CHROMED PARTS The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the current world market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series is designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road and is considered the number one for "SHOW TRUCKS", the famous decorated tractors. The extraordinary exterior style is matched with exclusive new interiors which provide exceptional comfort for the driver and a wide range of colour and material options. In addition, our tractor model is finished with fantastic decals and metallized stickers ready to be applied. The packaging also contains new chromed plastic parts that give the model a realistic appearance.   Warning! Not suitable for children under 14 years.
€59.99
incl. VAT plus P&P

1:24 Scania T143H 6x2

Article number: 510003937 Product: 1:24 Scania T143H 6x2 Length of the model 313 mm SUPER DECAL SHEET FOR 2 VERSION The Scania R143H 6x2 is a strong, reliable truck which is used for hauling heavy loads over long distances. The V8 engine is Europe’s strongest and most reliable truckengine, which makes high speeds possible at a low fuel consumption. The R-type cab with its rounded edges and slanted windscreen has been developed in a windtunnel. It also meets the most stringent safety regulations. Scania trucks are being used in more than 60 countries all over the world, from Lapland to Australia. Detailed Plastic Kit of model Scania T143H 6x2 in scale 1:24   Warning! Not suitable for children under 14 years.
€54.99
incl. VAT plus P&P

1:24 Shipping Container 20FT

The model Shipping Container 20FT in 1/24 scale has a length of about 254 mm. SUPER DECALS SHEET FOR 2 VERSIONS The 20-feet freight container is a key element for the international logistics. The 20-feet freight container, and the larger version and roomy 40-feet container, are in fact the international standard reference for all Countries. The standardize container in terms of size, volumes and loading capacity makes possible to optimize the intermodal freight by ships, trains and trucks. The logistic has became more effective and faster. Even the warehouses and stocking areas management became easier and more flexible.   Warning! Not suitable for children under 14 years.
€24.99
incl. VAT plus P&P

1:24 Tecnokar Trailer w/ 20ft Tank

Article number: 510003929 Product: 1:24 Tecnokar Trailer w/ 20ft Tank Model Dim.: 28,8 cm NEW MOULDS - CONTAINS PHOTO-ETCHED FRET The 20" Tecnokar Tank trailer is designed to ensure the highest level of efficiency in the liquid and fluid transport. The sturdy steel frame, on a three-axle system, made by the Italian Company, is able to load a 20" tank ideal to be used in the container intermodal logistic. It can well satisfy the need of complex and integrated logistic companies that adopting intermodal transport solution of liquid goods. That’s more and more important taking in consideration that, in the recent years, the intermodal transport solution of liquids, especially the liquids destined to the food industry, is a "must have" to guarantee reliability and respect of the delivery time. Detailed Plastic Kit of model Tecnokar Trailer w/ 20ft Tank in scale 1:24   Warning! Not suitable for children under 14 years.
€54.99
incl. VAT plus P&P

1:24 Timber Trailer

The model Timber Trailer in 1/24 scale has a length of about 560 mm. This trailer is especially designed for the transportation of logs and timber. It has a sturdy frame with wheels equipped with a complex three-axle shock absorber reinforced to accommodate heavy loads. Along the loading platform a series of extensible structures are in place to hold trunks of various sizes. These trailers are very popular in Europe and are combined with heavy tractors with two or three axes.   Warning! Not suitable for children under 14 years.
€58.99
incl. VAT plus P&P

1:24 Truck Accessories Set

  Warning! Not suitable for children under 14 years.
€28.99
incl. VAT plus P&P

1:24 Truck Rubber Tyres (8x)

8 RUBBER TYRES IN ONE BOX   Warning! Not suitable for children under 14 years.
€12.99
incl. VAT plus P&P

1:24 US CLASSIC WESTERN STAR

Length of the model: 340 mm SUPER DECALS SHEET The Western Star started to design and to build industrial vehicles in 1967. Since the beginning the Western Star product line up was a good synthesis, for its features, of the "ideal" American heavy truck. In particular the trucks dedicate to perform the highway transportation duties are still the reference point in the Western Star range. The American manufacturer is specialised in "tailor made", in terms of engines, gearboxes and frames, and customised trucks in order to meet the specific customers needs. However the customisation doesn’t stop to the technical configuration made by the factory. Most of time the passionate drivers used to equip their trucks with a wide adoption of accessories and chromed parts that make them unique and authentic "masterpieces" on wheels.
€53.99
incl. VAT plus P&P

1:24 VOLVO F-16 Globetrotter

Article number: 510003923 Product: 1:24 VOLVO F-16 Globetrotter Length of the model 240 mm About ten years after the release of the F-12, and because of its success with it, in 1988 Volvo launched the new F-16 with its state-of the-art features. Equipped with heavy-duty chassis, the truck features extensive hauling capacity, low fuel consumption and high travel comfort combined with a reliable and powerful engine which made it a leader in its category. The characteristics of ist 6 cylinder turbo-compressed 16000cc Intercooler engine are an output of 465 HP at 1200 rpm. The F-16 is thus well equipped to take care of long distance heavy load trucking. Of the various Versions offered by Volvo, our model represents the 2-axle tractor variant with the high (GLOBETROTTER) cabin. Detailed Plastic Kit of model VOLVO F-16 Globetrotter in scale 1:24   Warning! Not suitable for children under 14 years.
€47.99
incl. VAT plus P&P

1:24 VOLVO FH16 "Viking"

Article number: 510003931 Product: 1:24 VOLVO FH16 "Viking" Model Dim.: 25,0 cm SUPER DECALS SHEET ADDITIONAL CROMED PARTS - NEW TYRES - CHROMED WHEEL RIMS With the new Volvo FH16, Volvo once again offers a truck in the heaviest segment. It is based on the FH Series that was launched in autumn 2001, but it also features new technology that is unique to the Volvo FH16. The new Volvo FH16 is the most powerful, comfortable and safe model ever built by Volvo Trucks. Among the highlights of the new model are an all-new 16-litre engine with a power output of 610 horsepower, an exclusive interior and body features, and an advanced active safety system. The Volvo FH16 Series is built to tackle the toughest transport assignments with high gross vehicle weights and high average speeds in hilly terrain. Detailed Plastic Kit of model VOLVO FH16 "Viking" in scale 1:24   Warning! Not suitable for children under 14 years.
€59.99
incl. VAT plus P&P

1:24 Volvo FH4 Globetrotter /Medium Roof

Article number: 510003942 Product: 1:24 Volvo FH4 Globetrotter /Medium Roof Model Dim.: 24,6 cm Upgraded moulds - New parts - New photo-etched fret - Super decals sheet - Additional chromed decals - Chromed adhesive - Colors Instructions sheet The Volvo FH is the highest expression, in terms of development and technology, of the famous commercial and industrial vehicles brand. Its modern and eye-catching design has been made to optimize aerodynamics, to minimize consumption and to ensure the highest standards of operational efficiency. The cabin has been developed to offer the highest active and passive safety standards. The vehicle is also equipped with modern driving assistance and risk prevention systems. There are several possibilities for customizing the vehicle in order to respond promptly and precisely to any kind of transportation needs. The Globetrotter cab (CAB-HSLP) permits comfortable overnight stays for one or two people. Moreover, its vertical structure ensures a large capacity and capability for extra compartments. The internal height is 205cm. With the benefit of leading-edge software solutions the diesel engine of the VOLVO line has a lower impact on the environment and incorporates some of the best practices of cutting-edge technologies. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.
€69.99
incl. VAT plus P&P

1:24 Volvo FH4 Globetrotter XL

Article number: 510003940 Product: 1:24 Volvo FH4 Globetrotter XL Model Dim.: 24,6 cm 100% New Moulds Fully detailed interiors - Fully detailed engine and frame - Open or closed driver door - Chromed adhesive - Photo etched parts - The Volvo FH is the highest expression, in terms of development and technology, of the famous commercial and industrial vehicles brand. Its modern and eye-catching design has been made to optimize aerodynamics, to minimize consumption and to ensure the highest standards of operational efficiency. The cabin has been developed to offer the highest active and passive safety standards. The vehicle is also equipped with modern driving assistance and risk prevention systems. There are several possibilities for customizing the vehicle in order to respond promptly and precisely to any kind of transportation needs. The Globetrotter XL cabin is the ideal solution to host two people and, thanks to the increased height it offered a better storage capability. The FH4 version is powered with the powerful 6 cylinders Euro 6 13 liters diesel engine. In 2014 Volvo FH4 won the "International Truck of the Year" award assigned by a pool of journalists of the most important European trucks magazines. Detailed Plastic Kit of model   Warning! Not suitable for children under 14 years.
€69.99
incl. VAT plus P&P

1:24 Volvo VN 780 Tractor Truck 3Axle

Article number: 510003892 Product: 1/24 Volvo VN 780 Tractor Truck 3Axle The model Volvo Volvo VN 780 Tractor Truck 3Axle in 1/24 scale has a length of about 345 mm. SUPER DECALS SHEET FOR 2 VERSIONS - CHROMED ADHESIVE - CHROMED WHEEL RIMS The new VOLVO VN 780 tractor, an evolution of the NH 12 series, is specifically aimed at the American market, where the previous version has already proved popular and more than capable of competing with traditional US-built trucks.Characterised by a spacious drive cab, with sleeping facilities and every other comfort needed for the long-haul journeys typical of the US market, the vehicle has been completely restyled and the engine improved to contain fuel consumption and reduce emissions.   Warning! Not suitable for children under 14 years.
€59.99
incl. VAT plus P&P

1:24 Wheels Rims and Mud Guards

Article number: 510003870 Product: 1/24 Wheels Rims and Mud Guards This set has been developed to update the various heavy trailers in the Italeri 1/24 Scale range. It comprises a full set of six modern style mudguards and related supports, suitable for both old and new style trailers as indicated in a full list showed on the packaging. Also included four new concept wheels rims for the rear axle of the truck with separate central pin to facilitate the painting. Also included a rich decals sheet for european licence plates countries.   Warning! Not suitable for children under 14 years.
€14.79
incl. VAT plus P&P

1:32 F-104G/S - RF-104G Starfighter

Detailed Plastic Kit of model F-104G/S - RF-104G Starfighter - Upgraded Edition with Pod Orpheus in scale 1:32   Warning! Not suitable for children under 14 years.
€99.99
incl. VAT plus P&P

1:32 Lockheed F-35A Lighting II

Article number: 510002506 Product: 1:32 Lockheed F-35A Lighting II Length of the model 490 mm 100% NEW MOULD PHOTO ETCHED PARTS The JSF Joint Strike Fighter program was set up to develop a new fifth-generation all-weather multirole combat aircraft a ble to replace the existing United States and NATO strike-fighters. The aerospace industry team led by Lockheed Martin generated the single-seat, single-engine, F-35 Lightning II. It adopts stealth technology and it is characterized by the trapezoidal wings and by the use of the most advanced hi-tech materials and avionic systems. Developed to perform air superiority, close air support and ground attack missions, it has been design in different configurations. The F-35A is the conventional takeoff and landing variant, the F-35B is the short takeoff and vertical landing variant and the F-35C, with foldable-wings, has been developed to be used from conventional deck carriers. Thanks to its operational flexibility, the advanced on-board technology and the impressive project innovation, the F-35 lightning II will be a reference aircraft in the twenty-first century military aviation. Deatailed plastic kit of model Lockheed F-35A Lighting II in scale 1:32   Warning! Not suitable for children under 14 years.
€99.99
incl. VAT plus P&P

1:32 TF-104G

Article number: 510002509 Product: 1:32 TF-104G Length of the model 520 mm FULLY UPGRADED MOULDS PHOTO ETCHED PARTS & COLORED INSTRUCTION SHEET The Lockheed F-104 Starfighter is one of the most famous fighters in the history of aviation and also one with the longest operational life: its history began at the end of the 50s and ended, for some air forces, in mid 2000s. From its unique aerodynamic design, characterized by slender fuselage and very little wing surface, was developed the combat-capable two-seat advanced trainer version TF-104. Among the most widespread version, the TF-104G, produced by Lockheed was a fundamental training step for all the combat pilots before to seat in the F-104G or F-104S single-seat fighter version cockpits. Compared to the single-seat, the TF-104G didn’t have the 20 mm gun and the centerline pylon but, thanks to the General Electric J79 turbojet engine, the pilot and the Trainer could have the same flight experience and performance of the fighter version. A lot of N.A.T.O. air forces used the TF-104G to perform training duties as Belgium, Holland, Norway, Spain, Turkey, Germany and Italy. Deatailed plastic kit of model TF-104G in scale 1:32   Warning! Not suitable for children under 14 years.
€99.99
incl. VAT plus P&P

1:35 1/4 Ton 4x4 Ambulance Jeep

The model 1/4 Ton 4x4 Krankenwagen Jeep in scale 1/35 has a length of about 118 mm. Decals for 2 versions The ubiquitous jeep is perhaps the most all-round vehicle ever constructed. Because it xas ruggedly built and thus able to traverse most types of terrain without suffering structural damage, one of the task assigned to the jeep was that of ambulance service.   Warning! Not suitable for children under 14 years.
€11.29
incl. VAT plus P&P

1:35 15cm Panzerwerfer 42 auf SWS

Article number: 510006562 Product: 1:35 15cm Panzerwerfer 42 auf SWS Length of the model 198 mm NEW DECAL SHEET The Schwerer Wehrmachtschlepper (SWS) was developed as a medium half-track and used to transport supplies to front-line troops or as a towing vehicle for the light artillery. However, on the large rear flat load compartment some other applications have been developed. One modification was the Panzerwerfer 42 auf SWS, a 10 barreled 15 cm Nebelwerfer 42 rocket launched placed over an armored ammunition storage compartment. The rocket launcher, developed as device to create smoke screens, was soon used as real artillery able to launch high-explosive ammunitions. It could shoot the rocktes with impressive and deadly. Detailed Plastic Kit of model 15cm Panzerwerfer 42 auf SWS in scale 1:35   Warning! Not suitable for children under 14 years.
€29.99
incl. VAT plus P&P

1:35 20' Military Container

The model 20' Military Containerin scale 1/35 has a length of about 174 mm. 100% NEW MOULD Decals for 3 versions The 20-feet freight container is a key element for the international logistics. The 20-feet freight container, and the larger version and roomy 40-feet container, are in fact the international standard reference for all Countries. The standardize container – in terms of size, volumes and loading capacity – makes possible to optimize the intermodal freight by ships, trains and trucks. The logistic has became more effective and faster. Even the warehouses and stocking areas management became easier and more flexible.Thanks to its features and flexibility the 20-feet container has been adopted by several Armies to optimize the logistic and the ground support activities.   Warning! Not suitable for children under 14 years.
€17.99
incl. VAT plus P&P

1:35 38cm RW 61 auf Sturmmöser Tiger

Article number: 51006573 Product: 1:35 38cm RW 61 auf Sturmmöser Tiger Length of the model 17,9 cm NEW GLUEABLE RUBBER TRUCKS OR LINK BY LINK - DECALS FOR 2 VERSIONS - COLOR INSTRUCTIONS SHEET During World War II the German Army had to combat frequently fortified positions or urban defense centers. Due to tactical reason - the troops were at short distance to the enemy lines - artillery and air support could not be engaged. This led to the development of the "Sturm" - version of the "Tiger" heavy tank (Italeri N. 6471). Onto the heavy-duty chassis the efficient and unique 38 cm mortar was mounted, which had a short range but enormous fire power. Only few units of the Sturmtiger were built and were mainly used in 1944 on the Western Front. Detailed Plastic Kit
€31.99
incl. VAT plus P&P

1:35 4x4 Modern Military Verhicle

The model Lince Militäry Vehiclein 1/35 scale has a length of about 138 mm. 100% NEW MOULDS Decals for 4 versions The box contains: more than 250 parts, photo-etched fret, soft rubber tyres and colored Instruction sheet The light multi-role vehicle LMV Lince, produced by the Italian manufacturer Iveco, was developed to have all the main features required to a light armoured vehicle of the latest generation. The independent front and rear suspension system is able to guarantee an excellent performance on all types of terrain and in any operating condition. The lay out of Lince is able to ensure a good protection level against light weapons fire. The frame structure, the armoured plates and the protection cell have been designed to deflect and absorb mine blast and explosion caused by more powerful weapons. The Lince is ideal as infantry mobility vehicle and it is able to perform properly reconnaissance and scout duties. Further more it has been developed to have a good versatility and it can be outfitted with several improvements. It is mainly adopted by Italian Army but, thanks to its features, it is having a good commercial success.   Warning! Not suitable for children under 14 years.
€42.99
incl. VAT plus P&P

1:35 Accessories

  Warning! Not suitable for children under 14 years.
€9.49
incl. VAT plus P&P

1:35 BMW R 75 with Side Car

The model 1/35 BMW R 75 with Side Car in 1/35 scale has a length of about 66 mm. Contains 3 figures. Decal for one version. The new German army made use of the experiences collected in World War I to realize their modern reconstruction based on motorization. In spite of the limitations of the Treaty of Versailles able commanders introduced civilian vehicles into the army, thus creating a motorized mentality. In 1940 already, a battalion consisting of 3 to 4 companies each equipped with 52 motorcycles with sidecars and 4 motorcy-cles (single), was integrated into the motorized infantry and the armored divisions. Moreover, motorcycles were present in nearly all other Wehrmacht units, especially with the reconaissance units and the command, as well as the pioneer and the supply units. Produced in 16.500 units, the BMW R 75 together with the Zijndapp KS 750 formed the nucleus of the motorized units on all theatres of operations, especially in Africa and in Russia. The motorcycle was armored with an MG 34 mounted on the sidecar. On the road, it reached a maximum speed of 92 Km/h.   Warning! Not suitable for children under 14 years.
€11.99
incl. VAT plus P&P

1:35 Elco 80 Torpedo Boat PRM Edition

Article number: 510005602 Product: 1/35 Elco 80 Torpedo Boat PRM Edition The model Elco 80 Torpedo Boat PRM Edition in 1/35 scale has a length of about 700 mm. During the Second World War the U.S. Navy deployed a large amount of three types of motor torpedo boats: the Higgins measuring 78 feet and ELCO measuring 77 and 80 feet. Every model could be distinguished from the others, apart from by length, by configuration, weapons and various other details. The 80 foot ELCOs represented the most numerous class: they were realised in five series, for a total of about 300 examples Built in mahogany and pushed by three 1,350cv Packard 4M-2500 engines (taken to 1,500 in the latest series), these vessels easily exceeded 40 knots. The equipment and weapons were constantly updated and improved thanks to experience acquired in the field and the progressive change of role: with the progress of the conflict, in fact, the PT Boats left the original task of attacking and cutting off the traffic, taking on the role of gunships and operating in the proximity of the coast or in channels. The Italeri model reproduces the PT 596 and an 80-foot ELCO from the last batch produced.   Warning! Not suitable for children under 14 years.
€117.99
incl. VAT plus P&P

1:35 Field Tool Shop

  Warning! Not suitable for children under 14 years.
€9.49
incl. VAT plus P&P

1:35 Figure-Set Schnellboot Crew (10)

Article number: 510005607 Product: 1/35 Figure-Set Schnellboot Crew 10 FIGURES INCLUDED Deatailed plastic kit of model 1:35 Figure-Set Schnellboot Crew (10) in scale 1:35   Warning! Not suitable for children under 14 years.
€19.99
incl. VAT plus P&P

1:35 Figure-Set U.S. Infantry on Board

Article number: 510006522 Product: 1/35 Figure-Set U.S. Infantry on Board 100 % New moulds THE BOX CONTAINS 10 FIGURE. Deatailed plastic kit of model Figuren-Set U.S. Infanterie an Bord in scale 1:35   Warning! Not suitable for children under 14 years.
€22.99
incl. VAT plus P&P

1:35 Gal.S TankTrailer+M101 KargoTrailer

For the supply of front line troops or in maneuvers activities trailers were hauled by GMC 2 ½ ton trucks or water trucks as well as Dodge Command cars or even by Ambulance Trucks. These trailers standard equipment of the U.S. Army and its allies. Decals for one version   Warning! Not suitable for children under 14 years.
€12.29
incl. VAT plus P&P

1:35 HEMTT Gun Truck

Article number: 510006510 Product: 1:35 HEMTT Gun Truck The model HEMTT Gun Truck in scale 1/35 has a length of about 280 mm. FULLY UPGRADE MOULDS Decals for one version The acronym HEMTT (Heavy Expanded Mobility Tactical Truck) identifies a range eight-wheel drive off-road capable heavy truck, produced from the mid-80s for the United States Army. Thanks to its features, the HEMTT is able to guarantee a great off-road mobility and significant transportation performance. It has become the real "workhorse" of the Army capable of carrying ammunition and equipment in a very effective way. In a lot of conflicts, as in Iraq and Afghanistan, it has been often modified by the field workshops, on the specific requirements of the crews, in order to be more and more effective in the hard operating environments, Furthermore some HEMTT versions have been modified to be used in escort and convoys protection duties. Some additional protections and defensive weapons have been add on.   Warning! Not suitable for children under 14 years.
€37.99
incl. VAT plus P&P

1:35 House Corner

  Warning! Not suitable for children under 14 years.
€9.29
incl. VAT plus P&P

1:35 IT Cannon of 47/32 Mod.39 w/ crew

Article number: 510006490 Product: 1:35 IT Cannon of 47/32 Mod.39 w/ crew The model Cannone da 47/32 Mod. 39 with crew in 1/35 scale. 100% NEW MOULDS - THE BOX CONTAINS 5 FIGURES
€30.99
incl. VAT plus P&P

1:35 IT Land Rover 109´ LWB

Article number: 510006508 Product: 1:35 Land Rover 109´ LWB The model Land Rover 109´ LWB in scale 1/35 has a length of about 125 mm. Decals for 2 versions The "Land Rover" was certainly one of the most famous symbols of "Made in England" on four wheels and is a real milestone in the history of the off road vehicles. Born after the war, with the first prototypes done in 1947, to meet both civilian and military tasks. Inspired, though not directly, to the American Jeep, was characterized by a 4x4-wheel drive and a strong and reliable frame to tackle, with success, the most difficult and demanding trails. The aluminum body made it lighter, but at the same time, more resistant to corrosion and long lasting. In 1971, when the Series III was introduced, it had already been produced and made more than a million units for both civilian and military uses. Also available in 88 inches "standard wheel base", or in 109 inches "long wheel base". Decals for 2 versions   Warning! Not suitable for children under 14 years.
€12.99
incl. VAT plus P&P

1:35 IT WW2 PzKpfw.VI Tiger I Ausf.E mP.

The model Pz.Kpfw.VI Tiger I Ausf.E mid production in scale 1/35 has a length of about 241 mm. - UPGRADED MOULDS - - Figure not included - Parts for two variants - Photo-etched fret and link by link tracks included - Decals for 4 versions The Tiger I tank, which has been produced in the second half of 1943, was based on the hull of the firstoperational version used in North Africa and Russia. At the beginning this tank had wheels with rubber rim,which will be replaced in the following productions starting from February 1944, but it was equipped withthe new turret with increased protection and better cupola for the commander. Besides some of thesevehicles maintained the characteristic system of dust filters Feifel, and the smoke grenade launchers. On thetanks produced since August 1943 was also applied a magnetic mine paste that will become standard on alltanks of the German Army.   Warning! Not suitable for children under 14 years.
€35.99
incl. VAT plus P&P

1:35 JAGDPANZER 38(t) HETZER

Article number: 510006531 Product: 1/35 Jagdpanzer 38 (t) Hetzer Length of the model: 182 mm Decals for 4 versions. Born on the reliable and proven Panzerkampfwagen 38t light tank chassis, the Hetzer was set in the second half of 1943 to equip the German Army with a light tank destroyer more cost effective than the bigger and heavier Jagdpanther and Jagdtiger. The main features of the project were : a low profile, a good armored compared to the size, and a good fire power guarantee by the use of the 75 mm. anti-tank gun. Furthermore other important developing drivers were the possibility to produce easily and at a low cost. The Hetzer entered in service in the second half of 1944 and it was extremely effective and lethal even against the most powerful Allied tanks. Deatailed plastic kit of model JAGDPANZER 38(t) HETZER in scale 1:35   Warning! Not suitable for children under 14 years.
€29.99
incl. VAT plus P&P

1:35 Jagdpanzer IV WoT

Article number: 510036510 Product: 1:35 Jagdpanzer IV WoT Length of the model 210 mm -THE BOX CONTAIN: 1 MODEL KIT - 1 LIQUID CEMENT - 1 TANK GUIDE - WORLD oF TANKS DECALS - 1 INVITE CODES - 1 BONUS CODE The Pz. IV medium tank served as the basis for many vehicles, including tank destroyers. At the end of 1944, a version of the 75-mm PaK 42 L/70 gun was prepared for this basis. The new variant of the vehicle was designated the JagdPzIV/70. From August 1944 through March 1945, the Nibelungenwerke company produced 278 vehicles of this type.
€29.99
incl. VAT plus P&P

1:35 Kangaroo

Article number: 510006551 Product: 1:35 Kangaroo Length of the model 172 mm NEW DECALS SHEET – FIGURES NOT INCLUDED During the Africa campaign, the British Army used some Stuart light tanks, without the turrets, as armoured personnel carriers or as artillery tractors. Later on, to overcome the shortage of armoured vehicles, the Canadian General Guy Simonds ordered to the field workshops to remove the howitzers from the old M7 Priest and to convert them into infantry transport vehicles. Thanks to the positive results came out from the initiative among the Commonwealth troops, a lot of old tanks have been converted in "Kangaroo". Kangaroo was the nickname given to the modified vehicles able to perform the transportation of fully equipped soldiers directly close to the enemy line. The defensive armament could be vary and it depended on the availability of weapons as the .50 or .030 Browning machine guns and the Boys anti-tank rifle. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.
€27.99
incl. VAT plus P&P

1:35 Kfz. 69 Schwimmwagen

Article number: 510000313 Product: 1/35 Kfz. 69 Schwimmwagen The model Kfz. 69 Schwimmwagen in scale 1/35 has a length of about 109 mm, including 3 figures. Decals for one version. As the Volkswagen 82 (Kubelwagen) proved very successful during the campaign in Poland, it was necessary to produce everincreasing numbers of this vehicle. Later, Ferdinand Porsche developed an amphibian version of this car, called the Schwimmwagen. The light weight of this vehicle (about 1/2 ton) permitted crossing of muddy areas, since only two men were sufficient to keep this vehicle moving. For reconnaissance and liaison missions, water had to be crossed frequently, which was impossible with other vehicles.
€11.99
incl. VAT plus P&P
Shipping Information

If you put these articles in your shopping cart, the shipping address of your order is restricted to the following countries:

to the top