Diese Website verwendet Cookies. Durch die Nutzung der Website stimmen Sie der Verwendung von Cookies zu.
OK
Carson TamiyaMajoretteDickie ToysSchuco 
Offizieller  Hersteller  Shop

1:24 Alfa Romeo Giulietta Spider 1300

Art.Nr.: 510003653 Art.bezeichnung: 1:24 Alfa Romeo Giulietta Spider 1300 Length of the model 162 mm New realistic tyres! In 1962 the Alfa Romeo Giulietta Spider evolved with the adoption of some aesthetic improvements on the bodywork, some interior details and, the new 1.570 cm3 four cylinder engine able to release 92 Hp. Thanks to the new engine the Italian car was able to reach the max speed of 172 Km/h. The mechanical lay-out was based on the rear-wheel drive and four independent wheel suspension. The "Veloce" sport version was able to offer to the customers a powerful engine (112 Hp) with two carburetors and the adoption of the disk brakes on the frontal wheels.
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Fiat 131 Abarth Rally

Art.Nr.: 510003662 Art.bezeichnung: 1:24 Fiat 131 Abarth Rally Length of the model 174 mm SUPER DECAL SHEET EXTRA CATALOGUE The Fiat 131 Abarth was built on the frame of the two-door Fiat sedan. The development made by Abarth considered several modifications and improvements starting from the reduction of the body weight using lighter materials. Then some new fenders, to permit the adoption of larger wheels, were installed and new air-intakes on the hood and on the sides to optimize the cooling of the mechanics were designed. The engine was a 4-cylinder longitudinal engine characterised by the use light alloy head and 4 valves per cylinder. The Fiat 131 Abarth was built from 1976 and it was used in the World Rally Championship where achieved important results as three manufacturers’ championship, one pilots’ championship and one FIA trophy. It took part in international competitions until 1982 when it was replaced by the Lancia brand cars.
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Renault 5 Alpine

Art.Nr.: 510003651 Art.bezeichnung: 1:24 Renault 5 Alpine Length of the model 146 mm EXTRA CATALOGUE Decal sheet for black or blue body color The Renault 5 is a real icon of the French automotive World. The small car, developed by Renault, was produced from the beginning of the ‘70s to the first half of the ‘80s and it rapidly achieved an extraordinary commercial success in several Countries. The most relevant success factor was a very good mix between functionality, appealing design, reliability and smartness. From the chassis of the Renault 5 was developed the sport version Alpine that was characterized by high standard in terms of performance for a small urban car. It adopted the air-cooled 1397 cc 4-cylinder engine capable of delivering 93 Hp. Furthermore several new solutions were used on the Alpine as the braking system with front discs and rear drums or the use of innovative materials. Small, compact but with a very good performance especially in the acceleration and in the drive-ability.
24,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Renault 5 Alpine

Art.Nr.: 510003939 Art.bezeichnung: 1:24 IVECO Turbostar 190.42 Canvas Truck Length of the model 368 mm The Iveco Turbostar was an important commercial success for Italian manufacturer. Thanks to its characteristics of strength, reliability and performance, it achieved a significant position on the European truck market and it was the most widespread industrial vehicle in Italy in the late 80s. It was declined in numerous versions and adopted several outfitting to satisfy the specific transportation needs of the users. The version with the canvas deck was one of the most common version able to guarantee a great flexibility of transport of all types of goods. Another great advantage of the Iveco 190.42 was the loading capacity compared to the overall dimension. The payload / size ratio provided by 190.42 was an important factor to perform transportation duties outside of the motorways and even in the smaller urban area. Often an hydraulic rear platform to make easier the loading and unloading activities was added to the canvas version.
54,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 Sd.Kfz.10 Demag D7 w/German Paratr.

Art.Nr.: 510006561 Art.bezeichnung: 1:35 Sd.Kfz.10 Demag D7 w/German Paratr. Length of the model 135 mm The Sd.Kfz 10 Demag D7 half-track was used by the German troops in large numbers during the Second World War on all the main fronts from the invasion of Poland, to North Africa, to Russia. It was design and developed to be an effective prime mover for small towed artillery as anti-aircraft and anti-tank guns. The Demag D7 could carry eight fully equipped soldiers in addition to towing a gun or a trailer. The 4.2-liter Maybach 6-cylinder engine , positioned in the front of the vehicle, could delivered 99 hp. Thanks to its engine the half-track was able to reach a max speed of 65 km/h and to have a good on road and off road performance. The vehicle was reliable and flexible and it was produced in an important number of units and in several versions. Its frame was also the base to implement modifications and improvements directly from the field workshops in order to have vehicles fully in line with the specifics of the operating theaters.
27,99 €
inkl. Mwst. zuzüglich Versandkosten

1:35 T-34/85

Art.Nr.: 510006545 Art.bezeichnung: 1:35 T-34/85 Length of the model 232 mm 100%NEW MOULDS PHOTO ETCHED PARTS RUBBER GLUABLE TRACK OR LINK AND LENGTH - FULL INTERIORS The T-34 tank is certainly one of the most famous armoured vehicles of the Second World War and it was the mainstay of the Soviet Army during the conflict. The most important innovations introduced by the T-34 design were the frontal sloped armour, able to guarantee a better protection against the direct hits, and the adoption of wide tracks able to provide a good mobility on all types of terrain including mud and snow. The first version of T-34, armed with a 76 mm. short barrel gun, obtained immediately an advantage against the most common German tanks of the era as the Panzer III and the Panzer IV. In 1943 the T-34 was further improved with the adoption of a completely new turret, bigger and with a better armour, capable of housing the powerful 85 mm long barrel gun. Thanks to the new T-34/85 the Soviet Armoured Forces could effective face even the most modern and advanced German Tanks as the Tiger and the Panther.
51,99 €
inkl. Mwst. zuzüglich Versandkosten

1:48 Tornado GR.1/IDS - Gulf War

Art.Nr.: 510002783 Art.bezeichnung: 1:48 Tornado GR.1/IDS - Gulf War Length of the model 381 mm SUPER DECAL SHEET The multirole Tornado is a twin-engine combat aircraft with a variable-sweep wing. This kind of aircraft is the result of a joint development project carried out by British, German and Italian companies. Although during its lifetime it has been used for several purposes (ground attack, electronic combat/reconnaissance, interceptor), its main role has always been to perform low-altitude penetrating strike missions. Tornado can load and use a powerful and varied set of offensive weapons. Thanks to its two powerful afterburning turbofans, the Tornado can reach the max speed of Mach 2.2. The Tornado baptism of fire took place in 1991 during the Gulf War. More in detail, the air campaign of the Gulf War, in which the Italian Tornados IDS took part, began on 17th January. The goal of the aerial bombing campaign was the suppression of military targets and infrastructures.
27,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 A-6E Tram Intruder

Art.Nr.: 510001392 Artikelbezeichnung: 1:72 A-6E Tram Intruder Length of the model 230 mm The A-6 Intruder entered service in the mid-60s as ground attack carrier based aircraft to replace the outdated planes as the propeller-driven A-1 Skyraider and the A-3 Skywarrior. The Grumman Corporation developed and designed the A-6A, based on U.S. Navy specifications, a twin jet-engine all-weather medium attack aircraft able to operate from the American aircraft carriers. The so called "Intruder" was characterized by a sturdy and robust fuselage and for the two seats side by side cabin configuration for the pilot and the weapons officer. The A-6E was the definitive attack version of the "Intruder" improved in avionics and attack systems, in particular in the version named TRAM, from the acronym of the laser target designation system, that allowed to be more effective to perform "all weather" missions and to be more lethal in detection and suppression of enemy targets. Thanks to its hardpoints under the wing the A-6E Intruder was able to load an impressive offensive armament as conventional bombs, Paveway laser-guided bombs, Harpoon anti-ship missiles, HARM anti-radar missiles. It actively participated either from ground bases or from the carriers of the U.S. Navy, to Desert Storm campaign combat missions.
19,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 F-5E Swiss Air Force

Art.Nr.: 510001420 Art.bezeichnung: 1:72 F-5E Swiss Air Force Length of the model 200 mm EXTRA CATALOGUE Special colors Swiss Air Force (2 version) Developed in the early seventies from the American company Northrop, as direct evolution of its predecessor, the F-5E Tiger II was characterized by an increased power, a better maneuverability and better air-to-air performance. Its real strength, however, was represented by the low production and maintenance costs compared to a good combat effectiveness. Thanks to its cost / performance ratio the F-5E was chosen to equip the fighter squadrons of several air forces. Among these countries, the Swiss Air Force considered the F-5E suitable to meet the real unique features of which the Alpine Country needed. It was also produced under license by the Helvetic country. The F-5 Tiger II is armed with two 20 mm. guns installed in the nose and it can use a wide variety of offensive load on its hardpoints.
16,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Gladiatoren

Art.Nr.: 510006062 Art.bezeichnung: 1:72 Gladiatoren The games were incredibly popular throughout the Roman world, and the highlight of the day's entertainment was when the gladiators came out to do battle. This box try to capture the excitement and drama of the gladiatorial games. Gladiators were mostly categorized into one of several groupings or specialities, which dictated their costume and weaponry. The figures in this set include members of all four major groups. Their clothing and armour, or lack of it, are all consistent with what is known of the appearance of these men, and the weapons they carry are equally appropriate. The two men with the trident are retiarius, the others wearing a big helmet , the shield, the gladius were the Mirmillones. The set includes also a Chariot with four horses, a bear and two lions for the games representing hunting scenes of wild animals.
8,49 €
inkl. Mwst. zuzüglich Versandkosten

1:72 US NF F-14A vs A-4F

Art.Nr.: 510001422 Art.bezeichnung: 1:72 US NF F-14A vs A-4F Length of the models 265 mm / 169 mm EXTRACATALOGUE-TWO KITS INCLUDED "Top Gun" movie aircraft decals The American supersonic twin-engine Grumman F-14 Tomcat was the icon of the U.S. Navy fighter squadrons during the ‘80s and ‘90s. it was characterized by the adoption of the variable-sweep wing, the twin-tail and the tandem two-seat cabin. The "Tomcat" provided an impressive operational performance. Thanks to its two General Electric Afterburning turbofans it was able to reach the max speed of Mach 2.34. It was armed with a 20 mm M61 Vulcan rotating gun and it could use, in addition to the more conventional AIM-9 Sidewinder and AIM-7 Sparrow, the AIM-54 Phoenix radar-guided long-range missiles. The best pilots of the U.S. Navy Fighter Squadrons took part in combat training courses at the famous Fighter Weapon School better known as "Top Gun". The F-14 pilots could improve their combat skills and capability on the F-14 confronting against A-4 Skyhawk and F-5 Tiger II used by the school to simulate the flying characteristics of the Soviet Mig.
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 Vietnam War

Art.Nr.: 510006184 Art.bezeichnung: 1:72 Vietnam War The political-military escalation happened the 1960s in Southeast Asia has generated one of the longest and most complex conflicts in the recent History. The United States supported the South Vietnam Government against the North Vietnamese regular troops flanked by the People’s Liberation Armed Forces, commonly known as Vietcong. The ground war started on 1965 and ended only ten years later with the fall of Saigon of the evacuation of the latest American soldiers. The long years of war, started with an aerial campaign of bombing on North Vietnam, were characterised by clashed and fighting in tough rural environment with a vegetation and a structure of villages that provided ideal conditions for the guerrilla war. Unfortunately a huge number of civilians were involved in the war and in the military operations. The American military supremacy, which saw the massive use of helicopters and armoured vehicles, was counterbalanced by the effective North Vietnamese and Vietcong tactics.
67,99 €
inkl. Mwst. zuzüglich Versandkosten

1:72 X-47B

Art.Nr.: 510001421 Art.bezeichnung: 1:72 X-47B Length of the model 161 mm The Northrop Grumman X-47B is an demonstration unmanned combat air vehicle (UCAV) expressly designed and developed to operate from the flight decks of the US Navy aircraft carriers. The X-47B flew for the first time in 2011 and has performed, in the following years, several operational tests completed in 2015. The X-47B was used in the test cycles on board the U.S.S aircraft carrier George H.W. Bush (CVN-77) and it performed take-off, landing, air-refueling duties. To optimize the on board capability the X-47B is equipped with folding wings in order to minimize the space on the over crowded flight decks of the aircraft carriers. It is equipped with a Pratt & Whitney turbofan engine that guarantees subsonic performance and in its two loading bays it can provide an offensive load of over 2,000 kg.
31,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 Alfa Romeo 179 / 179C

Art.Nr.: 510004704 Artikelbezeichnung: 1:12 Alfa Romeo 179 / 179C THE BOX INCLUDES TWO MODEL OPTIONS WITH TWO DIFFERENT DECAL VERSIONS EACH COLOURED INSTRUCTION SHEET Steering wheels and working suspensions - Highly detailed model Removable cowling - Slick tires Length of the model 358 mm The Alfa Romeo 179 is a racing car which was used by the prestigious Italian brand Alfa Romeo for the Formula 1 competitions from 1979 to 1982. It was developed to replace the Alfa Romeo 177 and it made its debut at the Italian Grand Prix at Monza in 1979 in front of its Italian fans. It was equipped with a 1291 cc 12-cylinders naturally aspirated Alfa Romeo 1260 engine. There are a lot of notable Formula one drivers that brought the Alfa Romeo 179, and it’s evolution 179C, on the GP tracks as Mario Andretti, Andrea De Cesaris and Bruno Giacomelli that achieved a pole position in the United States Grand Prix at Watkins Glen in 1980. In 1982, due to the continuous technical changes necessary to be competitive in the Formula 1 competitions, the 179 was replaced with the Alfa Romeo 182.
129,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 FIAT 806 Grand Prix

Das Modell "Fiat 806 Grand Prix" im Maßstab 1:12 hat eine Länge von ca. 303 mm. UPGRADE PROTAR MOULDS The Fiat 806 Grand Prix adopted significant innovations for its time. In fact, the Fiat 806 was the "progenitor" of the modern Formula One racing cars. Developed and produced by FIAT, the Italian automobiles manufacturer, in 1927, it could be considered the first Grand Prix car ever built before. Thanks to its 180 HP 12 cylinders engine, the Fiat 806 was able to reach and even exceed the speed of 240 Km/h. However, the most important innovations were made in the development of the chassis, mechanics and bodywork. In fact, the engine and gearbox unit was located between the two chassis bars in order to optimize the performance and the drivability. The Italeri model is unique and very detailed (over 400 pieces to be assembled). The bonnet can be open to view the highly detailed engine. It has working steering, soft rubber tires, photo etched parts and little metallic accessories (screws, nuts, springs, etc).
154,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 FIAT Abarth 695 SS/ Assetto Corsa

Art.Nr.: 510004705 Art.bezeichnung: 1:12 FIAT Abarth 695 SS/ Assetto Corsa Length of the model 248 mm FULLY UPGRADED MOULDS -2 VERSION IN ONE MODEL PHOTO ETCHED PARTS The "Nuova 500" was produced by Fiat from 1957 to 1975. It is a real icon on four wheels and one of the symbols of "made in Italy". Its unique and recognizable design is famous all over the World. When the small car was set up by the Italian car manufacturer, its goal was simple: to introduce on the market at a very affordable price a new compact car able to enlarge the number of potential customers. In addition to the classic Fiat 500, that obtained an impressive commercial success all over the World, the Italian car manufacturer Abarth produced several special versions characterized by unmistakable sporting and racing attitude. In 1964 Abarth, originally founded as racing team, presented two interesting versions developed on the Fiat Nuova 500 chassis and body : the 695 and the 695 SS. Both versions were equipped with a 689 cm3 engine and were able to reach the max speed of 140 Km/h. In 1965 Abarth developed the Fiat 695 SS Assetto Corsa with improved performances and feature
129,99 €
inkl. Mwst. zuzüglich Versandkosten

1:12 FIAT Mefistofele 21706c.c. 1923-25

Art.Nr.: 510004701 Artikelbezeichnung: 1:12 FIAT Mefistofele 21706c.c. 1923-25 The model FIAT Mefistofele in scale 1/12 has a length of about 445 cm. Upgrade Protar Moulds Fiat Mefistofele, the Queen of World Land Speed The one-off racing car "Eldridge", derived from the old Fiat SB4 chassis, became known as Mephistofele for the infernal noise emitted by its powerful aircraft 6-cylinders in-line engine, giving a capacity over 20,000 cm3, not attenuated by exhaust mufflers kept "free" to provide the most significant performance. On 12th July 1924 in Arpajon, the Mefistofele, was able to reach, driven by its pilot and designer Ernest Eldrige, the amazing speed, for the time, of 146,01 miles per hour (over 230 Km/h) and broke the World Land Speed Record achieving an impressive result. The Mefistofele, was characterized by the high back bodywork able to contain the powerful Fiat A-12 liquid-cooled engine and for its structure especially made to achieve the speed record. Model unique in terms of technology and accuracy, consists of over 500 pieces to be assembled partially with screws: • Opening bonnet • Highly detailed engine
164,99 €
inkl. Mwst. zuzüglich Versandkosten

1:144 ATR 42 / 500

Das Modell ATR 42 / 500 im Maßstab 1:144 hat eine Länge von ca. 268 mm. 100% NEW MOULDS STAND BASE INCLUDED DECALS FOR TWO VERSIONS The ATR 42 was developed by the Italian-French manufacturer "Aeromobili da Trasporto Regionale" and making its first flight in the middle of ‘80s. The goal of the project was to create a twin-turboprop passenger aircraft that could be used as short-haul regional airliner. The low operating costs and the possibility to take off and to land on short runways were the main features of the small aircraft and were the base for the commercial success of the project. The ATR-500, introduced in the mid ‘90s, was the improved version and it adopts new engines and six-bladed propellers. Furthermore a dedicated military version, the ATR 42 MP "Surveyor" has been developed to perform maritime patrol duties. It is used by Italian Coast Guard, Capitanerie di Porto and Guardia di Finanza. Modellbausätze und Fertigmodelle von ITALERI, dem italienischen Traditionshersteller für feine Miniaturen, begeistern seit über 50 J ahren weltweit Modellbauer. Sie haben sich im Laufe der Jahre einen guten Ruf und eine riesige Fangemeinde geschaffen. ITALERI produziert seit 1962 Bausätze und Fertigmodelle in höchster Qualität und Passgenauigkeit, dies in den Maßstäben 1:16 bis 1:720. ITALERI-Werkzeug, -Farben und weiteres -Zubehör werden markenübergreifend verwendet und erfreuen sich größter Beliebtheit. ITALERI-Bausätze können nach eigenen Vorstellungen lackiert werden. Zur Fertigstellung werden separat erhältliche Farben, Klebstoff und Kleinwerkzeug benötigt. Die Einsteigerserien MY FIRST MODEL KIT und MODEL SET enthalten bereits Farben und teils sogar Werkzeug.
24,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 "The Familiy"Swissmilk Tank Trailer

The model "The family" Swissmilk tank trailer in 1/24 scale has a length of about 440 mm. SUPER DECALS SHEET INCLUDED SUPER DECALS SHEET INCLUDED Heavy tank trailers are very common in Europe for transporting all means of liquid goods from milk to various fuels and chemicals. Most of the modern trailers have a 3-axle single-wheel chassis, and can load up to 40,000 litres. These trailers are equipped with advanced brake systems and other safety features such as side impact barriers.
53,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 20' Container Trailer

Art.Nr.: 510003887 Artikelbezeichnung: 1:24 20' Container Trailer Length of the model 300 mm 100% NEW TRAILER MOULDS Designed to optimize the logistics of road transport, our trailer for 20" containers or swap bodies is inspired by the FCT model (fixed container transportation) produced by Tecnokar, leader company in high-Quality semi-trailer production and distribution since 1986. With its carefully built structure which offers the right balance between stability, sturdiness and durability, the fixed container transportation chassis is a steel Hbeam chassis with a 2′ fifth wheel coupling kingpin, Jost double-speed retractile oscillating rails and Twist arms with zinc-coated twists. It is also provided with the basic ADR standard equipment.
47,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Anhänger-Reifen (8x)

Art.Nr.: 510003890 Artikelbezeichnung: 1:24 Anhänger-Reifen (8x) 8 LKW-Reifen in einer Box.
12,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Australischer Truck

Das Modell Australischer Truck im Maßstab 1:24 hat eine Länge von ca. 332 mm. Australian outback truckers covering enormous distances on rugged and unsealed roads needs to equip their rigs with special modifications. They include a huge bull-bar (roo-bar), a sheet of wire mesh for windscreen protection, special dust filters, additional long range fuel tanks, heavy duty wheels, airconditioning and an array of different driving lights. Bulk goods are normally transported in Road Trains, which can have up to 3 trailers with a total length of over 31 metres.
54,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 BERLIET R352ch / RENAULT R360

Das Modell BERLIET R352ch / RENAULT R360 im Maßstab 1:24 hat eine Länge von ca. 266 mm. Aufkleber in 2 Versionen The Renault R360 was presented on the market in 1980 but it was a well known and already appreciated truck. In fact it was derives directly from the truck of the French company Berliet that became part of the Renault group in 1974. The new range of "heavy" trucks has been identify by the R letter followed by a number representing the engine horsepower. The Renault R360 was characterised by the adoption of a modern turbocharged 8V cylinders diesel engine capable of deliver 356 horsepower. From the "light" 4x2 version with a gross total weight of 19 tons to the "heavy" version with a gross total weight of 44 tons, the range was large and able to match several customers needs. One of the strengths or "R" truck series was the modern cabin with a comfort on board at the highest level for the standards of the time The "R" series has had, thanks to Renault sales and service network, a good commercial success. Packaging Availability Country of Origin Decals versions Modellbausätze und Fertigmodelle von ITALERI, dem italienischen Traditionshersteller für feine Miniaturen, begeistern seit über 50 J ahren weltweit Modellbauer. Sie haben sich im Laufe der Jahre einen guten Ruf und eine riesige Fangemeinde geschaffen. ITALERI produziert seit 1962 Bausätze und Fertigmodelle in höchster Qualität und Passgenauigkeit, dies in den Maßstäben 1:16 bis 1:720. ITALERI-Werkzeug, -Farben und weiteres -Zubehör werden markenübergreifend verwendet und erfreuen sich größter Beliebtheit. ITALERI-Bausätze können nach eigenen Vorstellungen lackiert werden. Zur Fertigstellung werden separat erhältliche Farben, Klebstoff und Kleinwerkzeug benötigt. Die Einsteigerserien MY FIRST MODEL KIT und MODEL SET enthalten bereits Farben und teils sogar Werkzeug.
51,49 €
inkl. Mwst. zuzüglich Versandkosten

1:24 BERLIET/RENAULT "Le Centaure"

DECALS FOR 2 VERSIONS Length of the model: 266 mm Specifically designed for long distance trucking, the Centaure possesses all the versatility of its short distance brother plus a distinguishing « cap » over the cab. In this cap, the truckers can stow personal things, bedrolls, etc. These Centaures are used to get the merchandise quickly and safely to destinations across the wide Australian outback, the vast American west, and the jungles of Africa and South America. Able to carry up to 180 tons of freight, the long distance Renault R360 Centaure has a 355 Turbo horsepower motor which achieves maximum torque at 1.400 rpm. The eight cylinder engine uses direct injection fueling.
49,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Cargo Auflieger

Das Modell Cargo Trailer im Maßstab 1:24 hat eine Länge von ca. 580 mm. SUPER DECALS SHEET FOR 2 VERSIONS This latest-generation semitrailer is representative of much of Europe’s on-road haulage vehicles. Featuring an efficient braking system, side impact protection, a considerable load capacity, these trailers are used extensively and are produced by at least ten or so specialised companies, which provide a comprehensive range of variants to meet the specific needs of individual customers.
51,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Classic Canvas Trailer

Das Modell CLASSIC CANVAS TRAILER im Maßstab 1:24 hat eine Länge von ca. 505 mm. The tractor-trailer units with 3-axle trailer are dominating the European long-distance transport. The most common variants are the canvas-container and reefer trailer. Due to the heavy competition in long-distance hauling the owners are forced to utilize the weight limit of 40 tons of a track unit. This requires the application of modern materials like aluminum and plastic in the trailer construction, to keep the weight as low as possible. This trailer can be combined with all Italeri Trucks to impressive units.
51,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Classic US Truck Western Star

Length of the model: 340 mm SUPER DECALS SHEET The Western Star started to design and to build industrial vehicles in 1967. Since the beginning the Western Star product line up was a good synthesis, for its features, of the "ideal" American heavy truck. In particular the trucks dedicate to perform the highway transportation duties are still the reference point in the Western Star range. The American manufacturer is specialised in "tailor made", in terms of engines, gearboxes and frames, and customised trucks in order to meet the specific customers needs. However the customisation doesn’t stop to the technical configuration made by the factory. Most of time the passionate drivers used to equip their trucks with a wide adoption of accessories and chromed parts that make them unique and authentic "masterpieces" on wheels.
53,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 DAF 95 CANVAS

Art.Nr.: 510003914 Artikelbezeichnung: 1/24 DAF 95 CANVAS Length of the model: 378 mm Many experts today accept DAF as a trendsetter for trucks. Victories at the Paris-Dakar Rally and very economical features have contributed to the success of DAF trucks. "Concept 95/380" has been the flagship of the DAF fleet and the latest edition to the truck range of DAF. The model has many technical improvements over its predecessors: a remarkable noise reduction, 4-point shock absorbers and air suspension which create bus-like travelling conditions. This truck is powered by the powerful six-cylinder engine with ATI (Advanced Turbo Intercooling).
51,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 DAF XF-105 Space America

Art.Nr.: 510003933 Artikelbezeichnung: 1:24 DAF XF-105 Space America SUPER DECAL SHEET Length of the model 245 mm This road haulage tractor by DAF is a restyled version of the successful previous series. Offering excellent reliability and a good standard of comfort on long-haul routes, the XF105 also Features very good mechanical reliability and outstanding engine performance under a wide range of conditions, in full compliance with the strictest environmental standards. Also, in the event of an accident, the cab provides the driver with an extremely high level of protection. The cabin is the ideal solution to create interesting and "eye-catching" graphics that could make the truck unique and really customized. The DAF XF-105 Space America, has been presented, in limited edition, on 2008 with the blue, black and red colors and characterized by the "stars and stripes" livery.
54,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 DAF XF105

Art.Nr.: 510003917 Artikelbezeichnung: 1/24 DAF XF105 Length of the model: 245 mm SUPER DECALS SHEET - ADHESIVE STENCIL - NEW CHROMED WHEELS - NEW TYRES This road haulage tractor by DAF is a restyled version of the successful previous series. Offering excellent reliability and a good standard of comfort on long-haul routes, the XF105 also features very good mechanical reliability and outstanding tengine performance under a wide range of conditions, in full compliance with the strictest environmental standards. Also, in the event of an accident, the cab provides the driver with an extremely high level of protection. The name "Smoky" comes from the race horse owned by the driver father (from here "Junior") which, used to winning, during the race was disappearing like a puff of smoke in front of his opponents. In a Wild West atmosphere, the horses are the protagonists in the airbrushed sides of his DAF XF 105 too.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Ford Escort Mk.II

Art.Nr.: 510003655 Artikelbezeichnung: 1:24 Ford Escort Mk.II Length of the model 165 mm The Ford Escort Mk 2 was launched in 1975. It was a significant evolution compared to the Escort Mk 1 that debuted at Brussels Motor Show in January 1968. It used the reliable mechanical components as the Mk 1 but adopted a new design based on a squared-style look able to be in line with the aesthetic and stylistic taste of the 70s. The product range was wide, declined in three Body styles (2 doors, 4 doors and 3 doors station wagon), five type of engines and a significant variety of settings and configurations. The Escort Mk 2 was mainly produced in the Ford Group German plants and achieved a good commercial success. In addition to the more classic version, it was also released the Escort Sport version characterized by a more aggressive look and distinctive Sport interiors. To compete, successfully, in World Rally Championship, a dedicated model, the RS 1800, was introduced to complete the line up.
28,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Ford Escort RS 1800 MK.II Lombard

Art.Nr.: 510003650 Art.bezeichnung: 1:24 Ford Escort RS 1800 MK.II Lombard Length of the model 165 mm EXTRA CATALOGUE SUPER DECALS SHEET The Ford Escort Mk 2 was launched in 1975. It was a significant evolution compared to the Escort Mk 1 that debuted at Brussels Motor Show in January 1968. It used the reliable mechanical components as the Mk 1 but adopted a new design based on a squared-style look able to be in line with the aesthetic and stylistic taste of the 70s. In addition to the more classic version, it was also released the Escort Sport version characterized by a more aggressive look and distinctive sport interiors. To compete, successfully, in World Rally Championship, a dedicated model, the RS 1800, was introduced to complete the line up. Successful results has been achieved. From 1975 to 1979 the Ford Escort RS 1800 won for five consecutive years the prestigious RAC (Royal Automobile Club) Rally, the most important rally event organized in the United Kingdom and an important milestone of the World Rally Championship. Among the others the team Mikkola Hannu - Hertz Arnee won the "Lombard" on 1978 and 1979
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Ford Transit Mk. II

Art.Nr.: 510003687 Artikelbezeichnung: 1/24 Ford Transit Mk. II Length of the model: 192 mm THIS MODEL IS A RIGHT & LEFT-HAND DRIVE Transit is a light commercial vehicles series produced since 1953 by Ford Germany and Ford UK and conceived for European market. The front engine of these vehicles allows to have a lower loading bed, which eases the loading process. Anyway the very first Transit was produced in 1965 by the German and British Ford together, expressly wanted by Henry Ford; this cooperation gave life to what is Ford Europe today and to the well-known vehicle MK I. In 1978 it was further reshaped and the MK II was born. In 1984 an esthetic restyling was made on the front bumper and to the engine, which was a 68 horsepower Diesel York of 2498 cbm. These vehicles have been a commercial success not only in Europe, as still today they are in production also for extra European markets.
31,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Ford Transit UK Police

Art.Nr.: 510003657 Artikelbezeichnung: 1:24 Ford Transit UK Police Length of the model 185 mm The Ford Transit is a light commercial vehicle range which first entered production in 1965 as a Joint venture between Ford Germany and Ford Great Britain. Prior to 1965 there had been a Ford Taunus Transit which was built by Ford of Germany in 1953. The Ford Transit Mk.2 was produced from 1978 – 1986. This Van was produced in both Fords Genk factory in Belgium as well as in Fords UK factories, initially in Langley before moving to Southampton due to higher demand than originally expected. This version depicts a Police Control Vehicle as used by the Metropolitan Police Force in the 1980’s. They were usually used during major traffic incidents, and during major public events, such as football matches, concerts, New Year celebrations etc. This 1:24 scale kit contains five separate sprues and can be built up both as a LHD or RHD version.
31,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Freightliner FLC

Art.Nr.: 510003859 Artikelbezeichnung: 1:24 Freightliner FLC Das Modell Freightliner FLC im Maßstab 1:24 hat eine Länge von ca. 325 mm. This more than 50 year old US-truck manufacturing company has an excellent reputation for quality and beautiful design of their products. In 1981 Daimler-Benz AG, the parent company of Mercedes-Benz, one of the worlds biggest truck manufacturers, purchases the Freightliner Corporation. The company will continue all activities under the original Freightliner name. Daimler-Benz has also imported several models to Europe for demonstration purposes and truck shows. All Freightliner trucks have a common basic technical design, many are custom-built to the customers needs. The model is a Conventional FLC 12064T Tractor with a 475 HP Cummins-Diesel engine and a 13 speed Fuller-Roadranger Transmission.
55,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Freightliner FLD 120 (Classic)

Art.Nr.: 510003925 Artikelbezeichnung: 1:24 Freightliner FLD 120 (Classic) Length of the model 325 mm Founded in 1942, with more than 70 years of activity in the commercial and industrial vehicles industry, the Freightliner Trucks company, is a piece of the road transportation history in the United States. Since 1981 the owner is the multinational corporation Daimler AG that reinforced the role of Freightliner to be a reference point on the market. One of its icons is the Freightliner FLD that was introduced on the market in 1987. It is characterized by an aerodynamic design, applied to the "conventional tractor", that was very innovative for the time. The Freightliner FLD remained in production for many years until the beginning of the 2000. A lot of versions were produced with special configurations and outfittings able to satisfy every kind of transport need. The FLD was an excellent platform for the customization and for the creativity of the American "truck drivers".
49,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 IT DAF 3600 SPACE CAB

Art.Nr.: 510000777 Artikelbezeichnung: 1:24 IT DAF 3600 SPACE CAB Length of the model 275 mm The Dutch manufacturer DAF introduced, in 1985, a new truck developed and built on the base of DAF 3300 Turbointercooling: the Space Cab. The cabin was very innovative and characterized for an higher aerodynamic standards. The new cabin was able to provide a significant level of driving comfort and was ideal for international commercial freight. The engine used was the reliable 11.6 liters capable of delivering, with a good torque, 373 horsepower. Even the consumption was, at that time, a strengths that permitted to the "Space Cab" to achieve a good commercial success.
49,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Iveco HI-WY E5 "Abarth"

Art.Nr.: 510003934 Artikelbezeichnung: 1:24 Iveco HI-WY E5 "Abarth" Length of the model 254 mm SUPER DECAL SHEET The Stralis Hi-Way is the latest evolution of the famous heavy duties truck produced by Iveco. The Stralis Hi-Way is characterized by several technological and aesthetic improvements compared to previous versions. The cabin offers a completely new design and is equipped with integrated electronic systems able to optimize the on-board comfort and to provide the highest safety standard. The evolution of the Stralis is also characterized by a completely new "powertrain" able to minimize the fuel consumption and the maintenance costs. The new engine strength is in fact to stay in line with the new Euro 5 anti-pollution regulation and to keep a very high operation effectiveness in terms of cost of ownership. In 2013 Iveco Stralis Hi-Way won the "International Truck of the Year" award assigned by a pool of journalists of the most important European trucks magazines. On 2017 Iveco announced that has supplied a Stralis Hi-Way, characterized by a dedicated livery, to Abarth Racing Team to support the logistic of the famous Italian sport brand.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 IVECO HiWay - 40. Iveco Anniversary

Iveco, to celebrate the 40 years anniversary from its foundation, has created an exclusive special version of its famous heavy track Stralis Hi-Way. The external design is characterized by a metallic blue livery with gray band that cuts the center grille. The interiors are really excusive with a dedicated set of premium details. The Stralis Hi-Way is the latest evolution of the famous heavy duties truck produced by Iveco. The Stralis Hi-Way is characterized by several technological and aesthetic improvements compared to previous versions. The cabin offers a completely new design and is equipped with integrated electronic systems able to optimize the on-board comfort and to provide the highest safety standard. The evolution of the Stralis is also characterized by a completely new "powertrain" able to minimize the fuel consumption and the maintenance costs. In 2013 Iveco Stralis Hi-Way won the "International Truck of the Year" award assigned by a pool of journalists of the most important European trucks magazines.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 IVECO STRALIS Active Space

Art.Nr.: 510003869 Artikelbezeichnung: 1:24 IVECO STRALIS Active Space Das Modell IVECO STRALIS Active Space im Maßstab 1:24 hat eine Länge von ca. 237 mm. 100% NEW MOULDS - DECALS FOR 2 VERSIONS The IVECO Stralis is, without doubt, one of the most popular tractors present today on the European highways. IVECO has obtained several success in the tractors and semi-trailer trucks business such as the Turbostar in the 80’s, the Eurostar and the Eurotech The Stralis, launched in 2002, is the last generation tractor developed by the Italian company. The powertrain was developed around the 8, 10 and 13 liters, 6-cylinders lay out, Cursor engine. The Cursor engine range, thanks to its turbocharged technology, is capable of delivering up to 560 H.P. The Stralis is mainly built in the configuration 4x2 with 2 axles 6x2 with 3 axles. From the first types, the manufacturer has developed several versions with various improvements. The most significant improvements, with the specific goal to guarantee the highest on board comfort level, have concerned the cab.
54,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 IVECO Stralis HI-WAY 4x2

Art.Nr.: 510003899 Artikelbezeichnung: 1:24 IVECO Stralis HI-WAY 4x2 Das Modell IVECO Stralis HI-WAY 4x2 im Maßstab 1:24 hat eine Länge von ca. 254 mm. Überarbeitete Formen The Stralis Hi-Way is the latest evolution of the famous heavy duties truck produced by Iveco. The Stralis Hi-Way is characterized by several technological and aesthetic improvements compared to previous versions. The cabin offers a completely new design and is equipped with integrated electronic systems able to optimize the on-board comfort and to provide the highest safety standard. The evolution of the Stralis is also characterized by a completely new "powertrain" able to minimize the fuel consumption and the maintenance costs. The new engine strength is in fact to stay in line with the new Euro 6 anti-pollution regulation and to keep a very high operation effectiveness in terms of cost of ownership. In 2013 Iveco Stralis Hi-Way won the "International Truck of the Year" award assigned by a pool of journalists of the most important European trucks magazines.
54,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 IVECO Stralis Yellow Devil

Lieferumfang: Neue verchromte Plastikteile Super Dekorbogen und verchromte Aufkleber
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Iveco-Magirus DLK 23-12 Fire Ladder

Art.Nr.: 510003784 Artikelbezeichnung: 1:24 Iveco-Magirus DLK 23-12 Fire Ladder Length of the model 369 mm Due to ever increasing safety requirements at modern buildings to-days fire engines require extremely high standards. The ladder (DLK 23-12) enables the fire fighters to reach a max. height of 23 m. at a distance of 12 m. These ladders are being mounted on different truck Chassis according to customers specifications, where by the assembly is carried out by specialized companies, in our case by Magirus-IVECO. The ladder contains 4 units made out of steel profiles with a basket at the end which can take up to 3 persons. Thus the vehicle is usable for firefighting as well as rescue missions. To increase the stability those turntable ladders have lateral supports Our model consists of a detailed truck with turntable ladder which can be mounted in firefighting or moving positon.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Lamborghini Countach 25th Anniv.

Length of the model: 180 mm Final version of the glorious Countach, dedicated to the 25th anniversary of Lamborghini, boasts numerous improvements, were in fact changed about 3,000 of the 8,000 pieces that make up the car. Much of the aesthetic innovations derived from the prototype Countach Evoluzione in 1986, the first supercar in the world made of carbon fiber. The air box and the air intakes were redesigned and enlarged and were mounted of miniskirts , the geometry of the suspension was modified. The improved aerodynamics allowed a maximum speed of 300 km / h. This was the last version made the Countach, which remained in production until 1990 when it was replaced by the Diablo.
26,49 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Lamborghini Diabolo

Length of the model: 186 mm The Diablo was produced between 1990 and 2001. During this period, Lamborghini introduced several variations of the Diablo concept, the first being the Diablo VT (Visco Traction), which featured an all-wheel drive. The Diablo was destined to become the worthy heir of the renowned Miura and Countach. This newsupercar was wide, low and futuristic. And just like its predecessors, the Diablo soon became a favorite among car enthusiasts across the world. The Diablo models helped build the legend of Lamborghini and sold well. Almost 3,000 units across all series and variations found their buyers in those eleven years of evolution. The Lamborghini bosses had wished for a maximum speed of at least 320 kph, and the engineers made this wish come true: With a top speed of 325 kph and an acceleration from 0-100 in 4.5 seconds the Diablo claimed the pole position in the super sports cars segment. It delivered its power via a rear-wheel drive and came with a newly developed V12 engine. Four valves per cylinder, a computer controlled multi-point fuel injection and a displacement of 5.7 liters helped produce a maximum of 492 HP.
26,49 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Lamborghini Miura

Art.Nr.: 510003686 Artikelbezeichnung: 1/24 Lamborghini Miura Length of the model: 180 mm Very few cars manage to change the automobile world like the Miura. With its central V12 engine and fascinating body, designed by Marcello Gandini for Bertone, the two-seater redefined the concept of a sports car. At its debut the Miura was the fastest car produced in the world: with a top speed of 280 kph and an acceleration from 0-100 kph in 6.7 seconds, the Lamborghini Miura set new standards in the sport car segment. The original Miura was produced between 1966 and 1969. But the successful story did not end there: the Miura was first developed further into the Miura S with 370 HP and later into the Miura SV, which had wider mud guards and a greatly revamped 385 HP engine with separate lubricating systems for engine and gearbox.
23,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Lancia HF Integrale

Art.Nr.: 510003658 Artikelbezeichnung: 1:24 Lancia HF Integrale Length of the model 160 mm COLORED INSTRUCTION SHEET The Lancia Delta HF four wheels-drive is considered an Icon of the Rally Competitions History. The Delta HF was produced in the second half of the 80s and participated in the World Rally Championship from 1987 to 1988 winning two world titles and achieving important results in a lot of competition as the Rallye de Monte-Carlo and the Rallye San Remo. The Lancia Delta Integrale was the evolution of the Delta HF. It was introduced in 1988 and dominated the World Rally Championship winning several constructors’ championship and an impressive number of competitions up to 1993. Updated in many aesthetic details that made it more muscular and aggressive, as the enlarged fenders and the new designed air intake on the engine bonnet, the Lancia HF Integrale was also improved in driving and engine performance. The 1995 cm3 turbocharged engine increased its power up to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and early 90s, bringing many famous pilots as Miki Biasion or Juha Kankkunen to victory.
29,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 LKW-Reifen (8x)

Art.Nr.: 51000389 Artikelbezeichnung: :24 LKW-Reifen (8x) 8 LKW-Reifen in einer Box
12,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Magirus Deutz 360 M19

Art.Nr.: 510003912 Artikelbezeichnung: 1:24 Magirus Deutz 360 M19 Length of the model: 370 mm SUPER DECALS SHEET FOR 2 VERSIONS The "360M19" has been produced by the German Magirus Deutz when the company was incorporated in Iveco Group. The truck is a good synthesis of all the strengths that made, the German manufacturer and outfitter, famous in the 70s and in the early 80s in the truck World. The sturdy chassis developed to perform "heavy duties", the rear axle with twin wheels, the leaf springs shock absorbers and the forward cabin derived by Iveco range, made it suitable to be an ideal platform for outfitting and special configurations. The truck adopted the V-10 Deutz Diesel engine, air cooled, that provide the possibility to reach 110 km / h. It was equipped with a 5-speed gearbox with reduced.
58,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 MAN 26.321 Formel 6 6X4

Art.Nr. 510000756 Artikelbezeichnung: 1:24 MAN 26.321 Formel 6 6X4 Length of the model 270 mm These trucks are equipped with the so-called 6 cylinder "Formula 6" engine which incorporates some of the most modern features of Diesel engine technology. Our truck 26.321 is equipped with a lot of accessories which have become quite popular in Europe, such as special big horns, exhaust pipes and other details which copied from American trucks and which make Europeans trucks look much fancier. This truck has participated at the Trucker – Festival.
48,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 MAN TGX XLX

Art.Nr.: 510003895 Artikelbeeichnung: 1:24 MAN TGX XLX Das Modell MAN TGX XLX im Maßstab 1:24 hat eine Länge von ca. 257 mm. - FULLY UPGRADED MOULDS - SUPER DECALS SHEET FOR 2 VERSIONS - ADDITIONAL CHROMED PARTS - SUPER CHROMED ADHESIVES With the new TGX range, MAN brings to the streets of Europe a new protagonist with a strong aesthetic impact. A vehicle with style and character that translates driving and space in a most exemplary manner, and redefines the standards of dynamic driving and profitability. The surprising aerodynamics reduce the fuel consumption by 3%. The XLX cab has the highest comfort and optimum freedom of movement on international scheduled routes. The innovative D2066, D2676 and D2868 engines with power ratings from 320 Hp (235 kW) to 680 hp (500 kW) demonstrate the progress. The modern diesel engine version EURO 5 develops more power with less fuel consumption and delivers a longer life.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 MAN TGX XXL D38 E6 Edition

Art.Nr.: 510003916 Artikelbezeichnung: 1:24 MAN TGX XXL D38 E6 Edition An interesting version of the famous German heavy truck characterized by an impressive, in perfect synergy with the design of the cabin, Arctic livery. The MAN TGX XXL is recognized by the commercial and industrial vehicles market as a reference point for its style and its personality. The development of the truck has been done taking in consideration the effectiveness and the performance in long range duties. The aerodynamic design of the truck is able to minimize the fuel consumption. Furthermore The XXL cabin offers maximum comfort on board and it can be considered an ideal solution for international long haul commercial activities. The range of engines has been developed to minimize the running and operating costs and ensure a longer working life.
54,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 MAN TGX XXL Wolf Transporte

Art.Nr.: 510003921 Artikelbezeichnung: 1:24 MAN TGX XXL Wolf Transporte Length of the model 237 mm SUPER DECAL SHEET + CHROMED ADHESIVE An interesting version of the famous German heavy truck characterized by an impressive, in perfect synergy with the design of the cabin, Arctic livery. The MAN TGX XXL is recognized by the commercial and industrial vehicles market as a reference point for its style and its personality. The development of the truck has been done taking in consideration the effectiveness and the performance in long range duties. The aerodynamic design of the truck is able to minimize the fuel consumption. Furthermore The XXL cabin offers Maximum comfort on board and it can be considered an ideal solution for international long haul commercial activities. The range of engines has been developed to minimize the running and operating costs and ensure a longer working life.
53,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Mercedes Benz 540K

Art.Nr.: 510003701 Artikelbezeichnung: 1:24 Mercedes Benz 540K Das Modell Mercedes Benz 540K im Maßstab 1:24 hat eine Länge von ca. 243 mm. One of the most beautiful automobiles of its time, the Mercedes Benz 540K was built from 1936-39. One unit is still shown in various parts of the world by Mercedes for promotion purposes. The car had a 8-cylinder 5.4 l engine and weighed no less than 2300 kg. Maximum speed was a stunning 170 km/h. Its fuel consumption was 28 to 30 liter for 100 km.
23,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Mercedes Benz Actros MP4 Gigaspace

Art.Nr.: 510003905 Artikelbezeichnung: 1:24 Mercedes Benz Actros MP4 Gigaspace Length of the model 269 mm 100% NEW MOULDS Actros is the commercial name for Mercedes-Benz heavy truck range. The Actros range has been introduced in 1995 and quickly achieved a significant commercial success as a suitable solution to perform longdistance haulage and heavy-duties haulage. The New Actros, introduced on the market in 2012, is the most update and innovative expression of the heavy truck Mercedes family. It is characterized by an advanced and modern design and the adoption of new Euro 5 and Euro 6 engines. The vehicle configuration has been designed and developed to guarantee the highest operational efficiency minimizing the running costs. Among the several configurations available it is particularly interesting the "GigaSpace", long-haul high-roof cabin version, design to offer the highest standard of comfort on board for two drivers. Thanks to its features, Actros Gigaspace can be considered one the best solution for international long-distance transport activities.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Mercedes Benz SK Eurocab 6x4

Art.Nr.: 510003924 Artikelbezeichnung: 1:24 Mercedes Benz SK Eurocab 6x4 Length of the model 270 mm In 1993 the most powerful Mercedes-Benz Truck with more than 500 HP, was introduced as the «Eurocab» with a raised roof cabin. Equipped with the same cab, two more engine versions are available, 380 HP and 435 HP. Contrary to many other truck manufacturers, most part assemblies such as transmission, engine etc. are produced by Mercedes in house. Power source is a V-8 turbo-charged Diesel engine, 14.6 l, with an output of up to 503 HP. Despite of ist high roof, the Eurocab features a roof spoiler to reduce fuel costs to a minimum. All Mercedes Trucks are built according to the new European noise and Emission control regulations.
49,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Mercedes-Benz Actros 2003

Das Modell Mercedes-Benz Actros 2003 im Maßstab 1:24 hat eine Länge von ca. 242 mm. This latest generation of Mercedes Benz Actros trucks was launched on the market in Spring 2003. Used to transport heavy loads over long distances, these models differ from their predecessors mainly as regards safety, running costs and driver comfort. The most significant developments are to be found in the drive cab interior (designed to satisfy even the most demanding truckers), the ever-more powerful engines and the technical improvements made to the drive axle. Externally, the new Actros trucks are characterised by the radiator grill, which have the fins set more widely apart to increase air flow and the new lights with super-clear casings and variable-focus reflectors. All Actros engines are of the new V-type Series 500: the V8 engine installed on the 1854 LS version provides from 503 to 578 HP.
53,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Muldenkipper-Anhänger

Das Modell Muldenkipper-Anhänger im Maßstab 1:24 hat eine Länge von ca. 370 mm. This great three axis trailer has been developed for earth and building debris transportation within construction sights. Equipped with high resistant steel chasse, it is capable to support stress on unpaved working areas. Characterized by a large tipping bucket capable of several tons payload. This trailer has installed with an efficient braking system enabling to guarantee maximum safety during transportation. It is further has a bucket covering system to eliminate loss of material risks while moving.
55,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Peterbilt 378 "Long Hauler"

Das Modell Peterbilt 378 Long Hauler im Maßstab 1:24 hat eine Länge von ca. 322 mm.
55,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Racing Trailer

Art.Nr.: 510003936 Artikelbezeichnung: 1:24 Racing Trailer The box includes the trailer only SUPER DECALS SHEET Length 580 mm The "racing trailers" are widely used by the most important racing teams to transport the cars, from the single-seat Formula 1 cars to the World Rally Championship cars. Furthermore the trailers are used by the two-wheel racing teams to transport the bikes, from the Moto GP World Championship to the Superbike races. The inner space of the trailers are optimized to permit the highest level of safety and care of the cars and motorbikes during the transportation. Not only. The trailers are also important communication tools for the teams, enhancing the manufacturers brands and the several technical and commercial sponsors. The presence of the eye-catching racing trailers in the Paddocks of the sports circuits is a real "must" for all international competition.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Range Rover Police

Art.Nr.: 510003661 Artikelbezeichnung: 1:24 Range Rover Police Length of the model 241 mm The Range Rover Classic can be considered a milestone in the history of off-road vehicles. It was produced in numerous variants and versions from 1970 to 1996. It was the first vehicle produced under the "Range Rover" brand and from 1981 it was available in the two- or four-door version. Thanks to its 4x4 traction and its sturdy structure, simple for construction but very reliable, the Range Rover was able to achieve very good off-road performances. The vehicle was able to obtain, very soon, good commercial success all over the World. The Range Rover, furthermore, was widely used by bodybuilders to create numerous special versions able to satisfy satisfy all types of needs. It has also been used by Police Departmets, Security Services and a lot of Public Services Fleet.
31,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Reefer Trailer

Das Modell Reefer Trailer im Maßstab 1:24 hat eine Länge von ca. 587 mm. NEW WHEELS This latest-generation semitrailer is representative of much of Europe’s on-road haulage vehicles. Featuring an efficient braking system, side impact protection, a considerable load capacity, these trailers are used extensively and are produced by at least ten or so specialised companies, which provide a comprehensive range of variants to meet the specific needs of individual customers. Modellbausätze und Fertigmodelle von ITALERI, dem italienischen Traditionshersteller für feine Miniaturen, begeistern seit über 50 J ahren weltweit Modellbauer. Sie haben sich im Laufe der Jahre einen guten Ruf und eine riesige Fangemeinde geschaffen. ITALERI produziert seit 1962 Bausätze und Fertigmodelle in höchster Qualität und Passgenauigkeit, dies in den Maßstäben 1:16 bis 1:720. ITALERI-Werkzeug, -Farben und weiteres -Zubehör werden markenübergreifend verwendet und erfreuen sich größter Beliebtheit. ITALERI-Bausätze können nach eigenen Vorstellungen lackiert werden. Zur Fertigstellung werden separat erhältliche Farben, Klebstoff und Kleinwerkzeug benötigt. Die Einsteigerserien MY FIRST MODEL KIT und MODEL SET enthalten bereits Farben und teils sogar Werkzeug.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Reifenset mit Schutzblech

Art.Nr.: 510003870 Artikelbezeichnung: 1:24 Reifenset mit Schutzblech This set has been developed to update the various heavy trailers in the Italeri 1/24 Scale range. It comprises a full set of six modern style mudguards and related supports, suitable for both old and new style trailers as indicated in a full list showed on the packaging. Also included four new concept wheels rims for the rear axle of the truck with separate central pin to facilitate the painting. Also included a rich decals sheet for european licence plates countries.
14,79 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Renauls R5 Rally

Art.Nr.: 510003652 Artikelbezeichnung: 1:24 Renauls R5 Rally Length of the model 201 mm For the 1977 Rally season the French company Renault developed a racing version of the popular small R5. In spite of the fact that this car was designed for very different scopes, after adequate preparation, the French technicians managed to obtain notable power from the engine: 150CV, and a noteworthy drive ration, which thanks to the contained weight of only 800 Kg. made the R5 a very manoeuvrable and fast car. The R5 obtained great results in the Sanremo and Montecarlo Rallies in 1978 and successively gratifying results in the Acropolis Rally and in Africa.
28,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Renault AE500 Magnum (2001)

Art.Nr.: 510003941 Artikelbezeichnung: 1:24 Renault AE500 Magnum (2001) Length of the model 241 mm Since the date of introduction on the market, in the 1990s, the industrial vehicles Renault Magnum range obtained a rapid commercial success with a lot of units sold. In 2001 the French Company presented a new version characterized by an extensive restilyng with a lot of improvement and changes, such as a new grill, a new roof spoiler, and a modified dashboard. The imporvemnts were realised to have a better commercial appeal and to be more in line with the changes in customers' needs. The engine has been re-designed to improved fuel-efficiency. The cabin, offering top comfort to the driver, can be tilted by almost 90° forward for maintenance and was in the top category as far as comfort is concerned.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Rolls Royce Phantom II

Art.Nr.: 510003703 Artikelbezeichnung: 1:24 Rolls Royce Phantom II Das Modell Rolls Royce Phantom II im Maßstab 1:24 hat eine Länge von ca. 235 mm. The Rolls-Royce Phantom II was introduced in 1929. With this new model the tradition of the manufacturer was continued: To build beautiful and expensive cars. Each body was made to order of each customer. Our model belongs to the P-2 series, which was built in 1934. The original, from which this model, was copied, can still be found in the famous Stratford Motor Museum in England.
23,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Rungenauflieger

Das Modell Rungenauflieger im Maßstab 1:24 hat eine Länge von ca. 560 mm. This trailer is especially designed for the transportation of logs and timber. It has a sturdy frame with wheels equipped with a complex three-axle shock absorber reinforced to accommodate heavy loads. Along the loading platform a series of extensible structures are in place to hold trunks of various sizes. These trailers are very popular in Europe and are combined with heavy tractors with two or three axes.
58,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Scania 143m Topline 4x2

Das Modell SCANIA 143M Topline 4x2 im Maßstab 1:24 hat eine Länge von ca. 242 mm. Scania 143M has been a milestone for heavy transport from the late 80s to mid-90s. Scania 143M, assembled in the Södertälje production plant, in Sweden, was one of the most successful models of the "3-Series", introduced by Scania in 1987 as the successor of the innovative "2-Series" of the 80s. Scania 143M, particularly in the 4x2 version, has quickly become one of the best solution for heavy transport duties on road thanks to its qualities of flexibility and reliability. It adopted different engine configurations, including the V8 500 HP combined with a 16-speed gearbox. Even today, after many years from the end of production, it is well remembered by drivers for its comfort and driveability.
56,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Scania 164L Topclass

Art.Nr.: 510003922 Artikelbezeichnung: 1:24 Scania 164L Topclass Length of the model 242 mm SUPER DECALS SHEET, CHROMED PARTS & CHROMED ADHESIVE NEW WHEELS AND NEW TIRES The Scania 164 has been a reference point of heavy commercial vehicles from the latest part of ‘90s to the first half of the following decade. It was the spearhead of the "Series 4" and it achieved a significant commercial success in a lot of Countries all over the World. The 16-litre engine was able to guarantee power and reliability minimizing, at the same time, the running costs. The 164L "Top Class" was characterized by the highest level of comfort on board either in running conditions or during the rest and parking. The design and the development of the vehicle was able to enhance the active and passive safety. Not least the aerodynamic restyling allowed to have an optimization in fuel consumption even at the high speed.
57,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 SCANIA R560 V8 Highline Red Griffin

Das Modell SCANIA R560 V8 Highline Red Griffin im Maßstab 1:24 hat eine Länge von ca. 247 mm. FULLY UPGRADED MOULDS - SUPER DECALS SHEET - CHROMED WHEEL RIMS - CHROMED ADHESIVE The new Scania R-series is designed to meet the highest demands in terms of fuel economy, driver comfort and reliability. The exterior design gives the vehicle an impressive sight on the road. The unique style of the exterior is combined with new exceptional interiors offer exceptional driver comfort and a wide range of choices of colors and materials. The version HIGHLINE provides maximum interior space and an almost flat floor. Available with both V8 engines and online. Robust, responsive and efficient, the Scania V8 engines are built to carry out the toughest jobs. Our model is also completed by a fantastic decals sheet and an accurate sheet of metallic adhesive, already ready for the application, for a correct finishing of the tractor vehicle, exactly as in the real.
58,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 SCANIA R620 Blue Shark

Art.Nr.: 510003873 Artikelbezeichnung: 1:24 SCANIA R620 Blue Shark Das Modell SCANIA R620 Blue Shark im Maßstab 1:24 hat eine Länge von ca. 242 mm. SUPER DECALS SHEET - CHROMED WHEELS - CHROMED ADHESIVE A new link joins the prestigious chain of limited editions launched by SCANIA in Italy (TOP CLASS in 2002, THE KING in 2003 and THE GRIFFIN in 2006) and created in collaboration with "SVEMPAS AB", the famous Swedish coach builder Sven Erik "Svempa" Bergendahl. The top of the line, meaning the street tractor R 620 LA 4x2 MNA Euro 5, dream of many drivers and transport operators, is supplied with the most exclusive technical equipment and additionally embellished with an exclusive series of accessories and particular finishes; this is Blue Shark in synthesis, available from April 2008 in 40 pieces exclusively for the Italian market. Among the most characteristic features we find the Platinum version CR19 TOPLINE cabin, hill-hold system, xenon headlights on bumper and sunshield, the cabin completely painted in metallic blue with glossy black finishes, exclusive cabin exterior and skirt decorations, leather upholstered wheel-front dashboard, 20" TV/DVD and much more.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 SCANIA R730 "The Griffin"

Das Modell SCANIA R730 "The Griffin" im Maßstab 1:24 hat eine Länge von ca. 247 mm. SUPER DECALS SHEET - CHROMED WHEELS - CHROMED ADHESIVE The Scania R series heavy tractor is designed to meet the highest demands in the world: fuel economy, driver comfort and relibility. it's strong exterior styling is an impressive sight for every one. The new restylized cab appearance is fully matched with the new interiors with outstanding driver comfort with a wide colors and equipement options. The Sania R tractor offers the widest choice of powertrain options in the market, so this truck could be easly configured on various needs. This new Scania R series truck is also equipped with the new and unique Scania Drive Support system as standar feature with the EBS and the innovative GRS/GRSO gearbox.This model is equipped with a special livery decals from "Griffin" that has had great success with European drivers: the classic Scania logo is revised here in a colorful and aggressive symbol of the Swedish version of the raptor. The model is also completed by an accurate sheet of metallic adhesive, which is ready for application, for a correct and complete finishing of the tractor vehicle, exactly as in the real.
58,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Scania R730 Streamline 4x2

Das Modell SCANIA R730 STREAMLINE 4x2 im Maßstab 1:24 hat eine Länge von ca. 247 mm. UPGRADE MOULDS - SUPER DECALS FOR 2 VERSIONS - SUPER CROMED ADHESIVE - ADDITIONAL CROMED PARTS The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the current world market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series is designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road and is considered the number one for "SHOW TRUCKS", the famous decorated tractors. The extraordinary exterior style is matched with exclusive new interiors which provide exceptional comfort for the driver and a wide range of colour and material options. In addition, our tractor model is finished with fantastic decals and metallised stickers ready to be applied. The packaging also contains new chromed plastic parts that give the model a realistic appearance.
58,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 SCANIA R730 Streamline Highline Cab

Art.Nr.: 510003932 Artikelbezeichnung: 1:24 SCANIA R730 Streamline Highline Cab SUPER DECALS SHEET Length of the model 247 mm The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the recent World market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series Streamline version, produced in 2013, was designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road The continuous evolution of the cabin allowed to reach the highest levels of driving comfort and habitability even in the most demanding long-haul commercial Transport activities.
54,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Scania R730 V8 Black Amber

Das Modell SCANIA R730 V8 BLACK AMBER im Maßstab 1:24 hat eine Länge von ca. 247 mm. Inklusive besonderer Bernstein Metallic Acrylfarbe 30 ml. In 2011, a new link was added to the prestigious chain of limited editions launched by Scania (TOP CLASS in 2002, THE KING in 2003, THE GRIFFIN in 2006, BLUE SHARK in 2008 and DARK DIAMOND in 2009) and created in partnership with "SVEMPAS AB", the famous Swedish truck manufacturer Sven Erik "Svempa" Bergendahl. The top of the range, or the road tractor R 730 LA4x2MNA Euro 5 V8 engine, the dream of many drivers and transport operators, is equipped with the most exclusive technical features and further enhanced with an exclusive range of accessories and special finishes. The most characteristic feature is the CR19 TOPLINE cabin in the TITANIUM version. Exclusive "Black Amber" metallic paint for the cab and plastic parts. Black Amber silkscreen with elegant flame pattern in carbon black with clear amber outline, ESP, LED brake lights on spoiler, xenon headlights in the sun visor and side lights integrated with the running boards, unique decorations outside cabin and side skirts, front instrument panel and steering wheel covered with leather, 22" TV/DVD and much more.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Scania R730 V8 Topline Imperial

Art.Nr.: 510003883 Artikelbezeichnung: 1:24 Scania R730 V8 Topline Imperial Das Modell Scania R730 V8 Topline Imperial im Maßstab 1:24 hat eine Länge von ca. 247 mm. Zum Modell: SUPER STICKERS & DECALS SHEET ADDITIONAL CHROMED PARTS The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the current world market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series is designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road and is considered the number one for "SHOW TRUCKS", the famous decorated tractors. The extraordinary exterior style is matched with exclusive new interiors which provide exceptional comfort for the driver and a wide range of colour and material options. In addition, our tractor model is finished with fantastic decals and metallized stickers ready to be applied. The packaging also contains new chromed plastic parts that give the model a realistic appearance.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Scania T143H 6x2

Art.Nr.: 510003937 Art.bezeichnung: 1:24 Scania T143H 6x2 Length of the model 313 mm SUPER DECAL SHEET FOR 2 VERSION The Scania R143H 6x2 is a strong, reliable truck which is used for hauling heavy loads over long distances. The V8 engine is Europe’s strongest and most reliable truckengine, which makes high speeds possible at a low fuel consumption. The R-type cab with its rounded edges and slanted windscreen has been developed in a windtunnel. It also meets the most stringent safety regulations. Scania trucks are being used in more than 60 countries all over the world, from Lapland to Australia.
54,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Shipping Container 20FT

Das Modell Shipping Container 20FT im Maßstab 1:24 hat eine Länge von ca. 254 mm. SUPER DECALS SHEET FOR 2 VERSIONS The 20-feet freight container is a key element for the international logistics. The 20-feet freight container, and the larger version and roomy 40-feet container, are in fact the international standard reference for all Countries. The standardize container in terms of size, volumes and loading capacity makes possible to optimize the intermodal freight by ships, trains and trucks. The logistic has became more effective and faster. Even the warehouses and stocking areas management became easier and more flexible.
24,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 TANK-Sattelauflieger "TOPAS"

Das Modell Schwerer Panzeranhänger TOPAS im Maßstab 1:24 hat eine Länge von ca. 430 mm. This modern tank trailer was built according to the latest findings in regards to safety measures. "TOPAS" stands for "Tank vehicle with optimal passive and active safety installations". These include: ABS, low gravity-center, high-positioned break lights and chassis protection built in aerodynamic shape. The tank has elliptic double wedge shape and for weight reasons is built of light metals. In the future, because of their highly inflammable payload, most tank trailers will be built in similar shape.
64,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Tecnokar Trailer w/ 20ft Tank

Art.Nr.: 510003929 Artikelbezeichnung: 1:24 Tecnokar Trailer w/ 20ft Tank Length of the model 288 mm NEW MOULDS PHOTO ETCHED PARTS The 20" Tecnokar Tank trailer is designed to ensure the highest level of efficiency in the liquid and fluid transport. The sturdy steel frame, on a three-axle system, made by the Italian Company, is able to load a 20" tank ideal to be used in the container intermodal logistic. It can well satisfy the need of complex and integrated logistic companies that adopting intermodal transport solution of liquid goods. That’s more and more important taking in consideration that, in the recent years, the intermodal transport solution of liquids, especially the liquids destined to the food industry, is a "must have" to guarantee reliability and respect of the delivery time.
54,99 €
inkl. Mwst. zuzüglich Versandkosten
inkl. Mwst. zuzüglich Versandkosten
inkl. Mwst. zuzüglich Versandkosten

1:24 U.S. Superliner Power Truck

Art.Nr.: 510003820 Artikelbezeichnung: 1:24 U.S. Superliner Power Truck Das Modell U.S. Superliner Power Truck im Maßstab 1:24 hat eine Länge von ca. 352 mm. This large tractor is representative of many trucks used in the USA. Equipped with powerful engines and very large fuel tanks, these vehicles travel hundreds of miles at a time from one State to another. Characterised by large drive cabs with in-built sleeping facilities and every other possible comfort, they are, for their American drivers, a true home from home. Numerous on the road movies have succeeded in making this category even more popular.
55,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 US Abschlepp-Truck

Art.Nr.: 510003825 Artikelbezeichnung: 1:24 US Abschlepp-Truck Das Modell US Abschlepp-Truck im Maßstab 1:24 hat eine Länge von ca. 345 mm.
62,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 VOLVO F-16 Globetrotter

Art.Nr.: 510003923 Artikelbezeichnung: 1:24 VOLVO F-16 Globetrotter Length of the model 240 mm About ten years after the release of the F-12, and because of its success with it, in 1988 Volvo launched the new F-16 with its state-of the-art features. Equipped with heavy-duty chassis, the truck features extensive hauling capacity, low fuel consumption and high travel comfort combined with a reliable and powerful engine which made it a leader in its category. The characteristics of ist 6 cylinder turbo-compressed 16000cc Intercooler engine are an output of 465 HP at 1200 rpm. The F-16 is thus well equipped to take care of long distance heavy load trucking. Of the various Versions offered by Volvo, our model represents the 2-axle tractor variant with the high (GLOBETROTTER) cabin.
47,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 VOLVO FH16 "Viking"

Art.Nr.: 510003931 Artikelbezeichnung: 1:24 VOLVO FH16 "Viking" Length of the model 244 mm SUPER DECALS SHEET ADDITIONAL CROMED PARTS - NEW TYRES - CHROMED WHEEL RIMS With the new Volvo FH16, Volvo once again offers a truck in the heaviest segment. It is based on the FH Series that was launched in autumn 2001, but it also features new technology that is unique to the Volvo FH16. The new Volvo FH16 is the most powerful, comfortable and safe model ever built by Volvo Trucks. Among the highlights of the new model are an all-new 16-litre engine with a power output of 610 horsepower, an exclusive interior and body features, and an advanced active safety system. The Volvo FH16 Series is built to tackle the toughest transport assignments with high gross vehicle weights and high average speeds in hilly terrain.
59,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 Volvo FH16 GLOBETROTTER XL

Das Modell Volvo FH16 GLOBETROTTER XL im Maßstab 1:24 hat eine Länge von ca. 244 mm. With the new Volvo FH16, Volvo once again offers a truck in the heaviest segment. It is based on the FH Series that was launched in autumn 2001, but it also features new technology that is unique to the Volvo FH16. The new Volvo FH16 is the most powerful, comfortable and safe model ever built by Volvo Trucks. Among the highlights of the new model are an all-new 16-litre engine with a power output of 610 horsepower, an exclusive interior and body features, and an advanced active safety system. The Volvo FH16 Series is built to tackle the toughest transport assignments with high gross vehicle weights and high average speeds in hilly terrain.
53,99 €
inkl. Mwst. zuzüglich Versandkosten

1:24 VW Beetle Coupé

Art.Nr.: 510003708 Artikelbezeichnung: 1:24 VW Beetle Coupé The Volkswagen Beetle is a real milestone in the Automotive History. The first model went into production before the Second World War and it were characterized immediately for an impressive reliability, a unique design, and a strong personality. The real commercial success, however, started from the end of the war. In fact the VW Beetle became one of the symbols of German industrial growth during the '50s and' the 60s. During the years several improvements and innovations has been adopted but never changed drastically the good original project and the unique design. On 1972 the "1303 model", characterized by more modern aesthetic solution as the curved windscreen and a new shape of the rear lights, has been launched on the market. The 1,300 cm³ engine has been flanked by the more powerful 1,600 cm³ engine. Up today the VW Beetle is still holding the record of the long-lasting car in the history. Length of the model: 170 mm
24,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 F-104G/S - RF-104G Starfighter

Art.Nr.: 510002514 Artikelbezeichnung: 1:32 F-104G/S - RF-104G Starfighter SUPER DECALS SHEET & PHOTO ETCHED PARTS COLORED INSTRUCTION SHEET Length of the model 520 mm The Lockheed F-104 Starfighter is one of the most famous fighters in the history of aviation and also one with the longest operational life: its history began at the end of the 50s and ended, for some air forces, in mid 2000s. Its unique airframe, with slender fuselage and very little wing surface, made this aircraft ideal as an interceptor. Thanks to the thrust of its General Electric J79-GE-11A afterburning turbojet engine, it could exceed Mach 2,2 with an excellent rate of climb. But it was not very manoeuvrable and difficult to pilot. The F-104G Starfighter was produced on license by several European aviation industries. From the mid-60s, it became the standard interceptor for many NATO countries including Italy, Germany, Holland, Greece, and Turkey. The armament was basically the same found on previous versions, with a 20mm Vulcan cannon and the option to fit under the wings air-to-air missiles, bombs, or additional fuel tanks to increase the airplane's range. With time, reconnaissance duties were added to the traditional interceptor service. The F-104G was therefore equipped with a dedicated "Orpheus" reconnaissance external pod that gave excellent operational results.
99,99 €
inkl. Mwst. zuzüglich Versandkosten

1:32 Lockheed F-35A Lighting II

Artikel-Nr.: 510002506 Artikelbezeichnung: 1:32 Lockheed F-35A Lighting II Length of the model 490 mm 100% NEW MOULD PHOTO ETCHED PARTS The JSF Joint Strike Fighter program was set up to develop a new fifth-generation all-weather multirole combat aircraft a ble to replace the existing United States and NATO strike-fighters. The aerospace industry team led by Lockheed Martin generated the single-seat, single-engine, F-35 Lightning II. It adopts stealth technology and it is characterized by the trapezoidal wings and by the use of the most advanced hi-tech materials and avionic systems. Developed to perform air superiority, close air support and ground attack missions, it has been design in different configurations. The F-35A is the conventional takeoff and landing variant, the F-35B is the short takeoff and vertical landing variant and the F-35C, with foldable-wings, has been developed to be used from conventional deck carriers. Thanks to its operational flexibility, the advanced on-board technology and the impressive project innovation, the F-35 lightning II will be a reference aircraft in the twenty-first century military aviation.
99,99 €
inkl. Mwst. zuzüglich Versandkosten
Versandinformation

Wenn Sie diesen Artikel in den Warenkorb legen, ist die Lieferadresse Ihrer Bestellung auf folgende Länder beschränkt:

nach oben